A universal remote control like the Xfinity Comcast can easily remedy your malfunctioning or lost Westinghouse TV remote woes. It only takes a few steps to program it to your TV, plus you can use it to control your other devices too! In this guide, we will show you all the steps involved in the process and some important tips.
Table of Contents
Programming Xfinity Comcast Remote Codes to Westinghouse TVs
In order to successfully program your Westinghouse TV to a Comcast remote, you need to utilize codes. Below this page, we listed all the compatible four to five digit codes you can use for these TV and remote models. To find out how to integrate them both, here are all the necessary steps.
1. List or prepare the list of codes so you can readily provide them when needed later on during the process.
2. Turn on the TV that you wish to program. Once your TV is turned on, check if your Xfinity Comcast remote has working batteries so it can work seamlessly throughout the process.
3. Press the Setup button on the remote control until the LED light located at the top turns green from red.
4. Using the number buttons on your remote, enter a four or five-digit code provided on the list below.
5. If the code entered is correct, the LED light on your remote should flash or blink twice. Make sure to check this to confirm if the programming worked.
6. Aim your remote control towards the TV and press the power button. Release it once the TV turns off. Turn the TV back on to test the remote and verify if the programming fully worked. Use other keys such as channels and volume.
7. If the TV responds to the buttons, you have successfully programmed your TV and remote. However, if the TV doesn’t consistently respond to the remote commands, you have to repeat the process all over from step one and use another code from the list below.
As exemplified above, the challenging part of this procedure are the codes. You have to repeat the steps until you find the set of numbers that work perfectly with your Westinghouse TV. All you need to do is to be patient and make sure to follow and observe the steps as as accurately as possible.
Xfinity Comcast TV Remote Control Codes for Westinghouse TVs
5-Digit Codes (XR2, XR5, XR11, XR15) for Newer Xfinity Remotes
- 10463 11661 10623 11909 12248 11913 12270 12258 12282 10451
5-Digit Codes (Digital Adapter Remote) MUG3067
- 10463 11909 11913 10451
4-Digit Codes (Silver with Gray OK Select Button) M1067
- 0463
5-Digit Codes (Silver with Red OK Select Button) MUG1067
- 10463 10623 11661 10661
5-Digit Codes (Spectrum & Tracer) MG3-4167 & M4167
- 10463 11661 11909
