If you don’t have the energy to grapple with your defective or lost Westinghouse TV remote control, the best alternative to use are universal remote controls. They have all the commands and controls you need, not only for your TV but for other devices too. All you need to do is to program it to your TV, which we will show how below with an RCA unit:
Table of Contents
Programming RCA Remote Control Codes to Westinghouse TVs
In order to program an RCA remote control to a Westinghouse TV, you need to use sets of codes. This will establish a secure and seamless connection between the two devices, which will allow you to use your TV with all necessary controls. All it takes are a few steps of programming which we will discuss in detail below:
1. Gather and collect all the codes below so you can immediately provide them later when prompted.
2. Once you have them, make sure that the TV you intend to program with your remote is plugged in and functioning. Turn it on throughout the whole process. Also check if your remote is functioning. Check if it has working batteries so it won’t cause any issue later.
3. To start the process, press and hold the SETUP button on your remote control and wait until a light flashes. This is an indicator that it is now on “Learning Mode,” which means the device and remote are ready to be programmed.
4. You will then be asked to enter the code from the list. Choose a set from the list provided below the page. Enter the code and double check if it is entered correctly.
5. After entering the code, aim your remote control towards the television. Now, press and hold the power button and release once the device shuts off.
6. When it turns off, it is an initial indication that the process of programming was successfully executed and that the code has been successfully integrated to your TV. To double check, restart your TV.
7. On your remote, press a few buttons such as volume or channel and confirm if your TV responds to such commands. If some of the buttons did not work, you have to have to try another code and begin again from step 1.
It’s completely common to encounter an incompatible code in your first attempt. All you need to do is enter another code until your TV successfully responds to the programming. Our technical team advises to observe the steps carefully to avoid any errors and repetition.
RCA Universal Remote Controls for Westinghouse TVs
3-Digit Codes (v.3) for RCU300T, RCU404, Etc.
- 072
4-Digit Codes (v.3) for RCR412B, RCR3273/3373, Etc.
- 1217 1036 1204
4-Digit Codes (v.4) for RCR804BR, RCRH02BR, Etc.
- 1712 1756 4398 0885 2434 0889 3183 0706 0890 2049 3559 1282 1300 1577 0451 3470 3579 3382 2293 3094 3949 2397 0463 1217 3899
5-Digit Codes (v.1) for RCRN08GR, RCRPS02GR, Etc.
- 11712 10885 11756 14398 10889 13559 12434 11300 11577 13183 13470 13579 10451 12049 11282 13382 13949 13094 12397 10463 13899 12293 11217 10000 10810 12337
