It’s undeniable that remote control issues can spoil the mood for entertainment. If you want an instant fix to your remote control woes, a universal remote control is the perfect solution! Not only are they compatible to many devices and equipment, but they are very easy and intuitive to use as well. If you’re an Element TV user, here’s how you can program RCA universal remote codes for Element TV.
Table of Contents
Programming RCA Universal Remote Codes to Element TVs
In order to successfully program your RCA universal remote to your Element TV, you need to use sets of codes throughout the procedure. Codes are a unique sets of numbers encoded into a device or equipment to establish control and command. These codes are tailored to fit according to device types and brands to ensure seamless compatibility.
In this step-by-step tutorial, our technical and audiovisual team will show you how to encode these codes so you can enjoy entertainment content on your Element TV in no time:
1. First of all, turn on your TV to prepare it for the programming. Also make sure that your remote has working batteries so it won’t cause any interruptions throughout the process.
2. Next, list down all the codes from the list that are specifically dedicated to your remote’s model and type. This way, you can just add them later when needed.
3. Press and release the TV button on your remote until the on/off button lights up. Leave it like that to proceed.
4. Press and hold the TV for five seconds. Wait for the LED light to flash twice before you release the button.
5. Enter a code from the list provided below. Enter the code using the number keys of the remote. Ensure that the code is entered correctly to avoid encountering any errors.
6. After every code you enter, the LED light will flash once. If the code is valid and accepted, the LED light will flash twice then will turn off.
7. Then, aim your remote control towards the television, press and hold the power button, and release once the it shuts down.
8. When your TV turns off, it’s an indication that the programming was successfully executed and that the code has been successfully stored. To further confirm, turn your TV back on.
9. Once the TV is turned on, use some of the remote buttons and functions. This will confirm if the TV responds to the remote commands. If it doesn’t respond, you unfortunately have to repeat all the steps and use another code.
Four and Five Digit RCA Universal Remote Control Codes For Element TVs
4-Digit Codes (v.4) for RCR804BR, RCRH02BR, Etc.
- 1687 1756 4398 3559 2434 0885 1886 3183 0706 2049 2183 2964 3907 4217 2256
5-Digit Codes (v.1) for RCRN08GR, RCRPS02GR, Etc.
- 13559 11756 14398 11687 10885 12183 12434 12964 13183 13907 12049 11886 14217 12256
