When you purchase a JVC soundbar, a remote control is included along with the rest of your purchase. However, if it disappears or malfunctions, you won’t be able to find a new remote control. An option to consider is a universal remote control. But, it is necessary to become acquainted with the operation of the universal remote control. Our experts have detailed how you can program it with this guide.
Table of Contents
Programming Universal Remote for JVC Soundbar
All universal remote control codes are screened in the remote through the auto search method. It scans one code at a time until it finds the correct code that works for your remote. To do this, follow the steps outlined below:
1. You need to turn on the device, such as the “TV,” that the universal remote will control.
2. After switching on the device, you have to select and press the button for the device. Hold it for at least 3 seconds. A small light will flicker. It indicates that the device is now in the learning mode so that we can make the changes.
3. Now hold the remote straight and choose Channel Up/Down buttons. The remote will display on/off signals. Continue to press the “up” or “down” key until the device turns off.
4. Verify the code by pressing the “power” button. You should now turn on the device. It switches on correctly, ensuring that the remote is correctly programmed by checking the Channel, volume, or any other button.
5. To save the code, tap the “device” button. The small light of the device will blink at least twice, indicating that the setting you have done has been saved.
Alternative Method for Another Device
- To set up JVC TV Remote “Turn On” your TV “Manually Or By TV Remote.”
- Select the “Mute Button” and the “Select” buttons at the same time until the green light blinks twice.
- Use the “Number Key” to enter the “First Digit,” and then wait for the “green light” to blink twice on top of the remote.
- After that, type in “Four Remaining Digits” now.
- Place the remote in front of your TV. Now press the “OFF” button; your television should now be switched off.
- If the television remains switched off, you can revise the procedure until it works with this universal remote control.
There are several brands to operate this TV, and there are different codes given for various brands. You can use the codes (3-Digit, 4-Digit, or 5-Digit) to install settings in your remote.
Manual Method for Another Device
We can easily program a universal remote using the keycode, and the keycode identifies the make and model of your equipment.
- To begin, you must “Turn On The Device.”
- On your “JVC TV universal remote,” press the “TV” button.
- Now, press and hold the Universal Remote’s “Setup” button until it flashes (this indicates that it is in “Learning mode”).
- Finally, enter the “Keycode” that you obtained from the programming guide (Instructions Booklet)
- After you’ve completed this step, “point your remote at the TV” and then “Press And Hold The Power” button.
- When the screen turns off, you can let go of the “Power Button.”
- That’s it; your TV should now work perfectly with the universal remote control [1]. If it doesn’t, try repeating the procedure with a different code from the same section of the reference table.
Code-Search Method
If you can’t find the correct key code for the device at the time, you can program your universal remote to search for it. It’s a manual code that puts the remote in search mode. After you’ve completed the preceding steps, move on to the following simple step.
1. On the universal remote control, look for the “PROG” button and click it until a tiny LED light flickers.
2. Next is to choose the “Soundbar” option.
3. You will find the correct code for the JVC soundbar and enter it in the provided spaces.
4. The above method may take a little longer, but it is critical to find your key code. After you’ve completed the preceding steps, your remote should be functional for all in-room functions.
5. You can also use another method to program your JVC 55EM76 TV with universal remote control codes, which are detailed below.
3-Digit Codes for JVC Soundbar:
- 013
- 067
- 054
- 060
- 065
- 089
- 055
4-Digit HDTV Codes for JVC Soundbar:
- 1130
- 1227
- 1131
4-Digit TV Codes for JVC Soundbar:
- 2096
- 2028
- 2115
- 2217
- 2206
- 2097
- 2090
- 2017
- 2204
