If you forget where you put your Innovative Technology Soundbar’s remote control or lose it for any reason, you can use the Universal Remote Control. It is easy to program and straightforward to use.
It is also possible to program them manually if you prefer. The following expert steps will help you program the remote control for an Innovative Technology Soundbar:
Table of Contents
Programming a Universal Remote for an Innovative Technology Soundbar
With the auto search method, you can see the codes of all universal remotes on the screen. A single code is scanned at a time to locate the correct code for your remote during programming. Here’s how it works:
1. Hold the remote straight now and press the Channel Up/Down buttons. On remote will display/off signals on the remote. You have to press the “up” or “down” key until the device turns off.
2. You have to switch on the device such as TV or Soundbar to check if the remote is working on it or not.
3. Now hold the “Device” button on the remote and press it continuously for 3-4 seconds.
4. During learner mode, the device will flicker a tiny flashlight. You can now make the changes on the device.
5. Hold the remote straight to face the device’s front side and press channel +/- buttons. On/off signals will appear on the remote.
6. Hold down the +/- button while waiting for the device to shut down.
7. If you hit the “power” button, you will be able to confirm the code. Now you should turn on the device.
8. When the TV turns on, verify that the remote has been appropriately programmed by checking the Channel, Volume, or any other button.
9. You can save the code to a device by tapping on the “device” button. You will see the device’s small light blinking at least twice, indicating that it has saved the settings listed.
Manual Method for Another Device
Using the keycode, we can easily program a universal remote [1]. It is specific for every model and company of the soundbar you’re setting up the universal remote. Here are the steps to follow:
1. To begin, press the “Turn On The Device” button.
2. Press the “TV” button on your “Innovative Soundbar universal remote.”
3. Now hold down the Universal Remote’s “Setup” button until it flashes. The flashlight indicates that the device is in learner mode.
4. You must enter the “Keycode” from the booklet in the last step.
5. Next, point your remote towards the device and then press and hold the “Power” button.
6. Once the screen shuts down, you can release the “Power Button.”
7. There’s no trouble left; the universal remote control should work flawlessly on your device. Try again with another code from the same section of the reference table if it doesn’t work.
Code-Search Method
Typically, the correct key code for the device is located on the device’s key panel. If you cannot find that key code at that moment, you can program the remote to look for it. You need to manually enter the code to activate the search mode on the remote.
1. When you have finished all the preceding steps, continue to the following straightforward step.
2. On the universal remote control, find the PROG button and press it until a small LED light blinks.
3. Choose the “Soundbar” option.
4. Put the Innovative Technology Soundbar’s code in the spaces provided to confirm that the unit is the one you are looking for.
5. It may take a bit longer to search through the above steps, but it is crucial to find the correct key code.
6. All in-room functions should be available after the completion of the preceding steps.
Checking if Your Innovative Technology Soundbar Remote is Universal
With a universal remote, you can control a variety of devices. Despite this, not all remote controls are Universal Remotes. Because of that, I recommend you examine the remote before programming. Follow these instructions to check your remote:
An optional command such as SET or MODE indicates that the remote is a universal remote that You can use for an intended purpose.
4-Digit Codes for an Innovative Technology Soundbar
- 3848
- 0556
- 0519
