Craving for some entertainment, but lost your TV remote? Worry not because remote control codes are here to save you. These codes are designed to work for a universal remote control so you can still command your TV despite losing the original remote. In this guide we will show you how you can do it for your Westinghouse TV.
Table of Contents
Programming Westinghouse Universal Remote Codes
In this article, we list all the working codes for your Westinghouse TV. Take into consideration that by going through the process, you might encounter errors or repetitions of previous steps, especially if you’re not tech-savvy. Also, know that this requires patience. Ensure that the appropriate codes are carefully entered to avoid errors that consume time and patience.
TIP: It would be much better to write down the codes that specifically correspond to the brand of your device so you can easily provide them when asked during the process. Aside from that, it will save you more time. Here is a guide how you can program your Westinghouse TV and other devices to a universal remote control:
1. First turn on the device that you want to program such as your television commonly, or any other device available. Ensure the batteries of your remote as well, see to it that it’s all working to avoid any interruptions during the process.
2. Aim your remote control facing your device so it can perform the commands during the process.
3. On your remote, locate the TV button. Press the SETUP button so you can proceed to the learning mode which prepares the remote control and device for programming.
4. You will then be asked to enter the code from the list that was provided. Ensure that the code is entered correctly to avoid encountering any errors during the procedure.
5. Take note, if you have executed the process right, the tiny light will blink 4 times as an indication. When it does, pick any of the codes above for your device and enter.
6. The button light will go off once you get the correct code. Then, aim your remote control towards the television, press and hold the power button, and release if the device shuts off.
7. When your device is turned off, it is an initial indication that the process of programming was successfully executed and the code has been successfully stored. To further confirm its functionality, turn back on your TV.
8. Once the TV is turned on, try to navigate and use some of the buttons to confirm if it responds to its respective commands. If some of the buttons don’t work, unfortunately, you have to repeat all the steps and use another code.
If you want to connect your remote to other devices, apply the same steps you executed when setting it up with your television.
Westinghouse Universal Remote Codes
Here are the codes which you can use to control both your DVD player, TV, VCR, Cable, Home Theater, Blu-Ray, satellite, and other Westinghouse devices available.
All In One Westinghouse TV Remote Codes
- 0916
- 0027
- 0912
- 0478
- 0002
- 3241
3-Digit Universal Remote Codes For Westinghouse TV
- 003
- 795
- 797
- 500
- 697
- 553
- 808
- 551
- 574
- 652
- 531
- 516
- 072
- 107
- 513
- 575
- 097
- 794
- 856
- 798
- 809
4-Digit Universal Remote Codes For Westinghouse TV
- 1489
- 0885
- 0143
- 3411
- 1430
- 1300
- 0890
- 1216
- 1454
- 5781
- 1027
- 1336
- 1367
- 1712
- 5054
- 5237
- 1036
- 4797
- 0114
- 1146
- 3241
- 3251
- 0111
- 1901
- 2281
- 3711
- 3851
- 5971
- 5981
- 1891
- 2141
- 0889
- 1282
- 1577
- 0451
- 1217
- 1019
- 1195
- 1196
- 1414
- 1433
- 0002
- 0915
- 0013
- 5001
- 5115
- 5117
- 5379
5-Digit Universal Remote Codes For Westinghouse TV
- 13382
- 13470
- 11577
- 11712
- 12499
- 19016
- 12824
- 10885
- 12536
- 12195
- 10463
- 10889
- 13579
- 11300
- 13949
- 12293
- 13094
- 10890
- 11282
- 12397
- 13908
- 10451
- 11217
- 10000
- 17133
- 18535
- 11106
- 12438
