Programming Dish Network Remote Codes to a Vizio TV

Lost your Vizio remote control? There’s no need to worry, because you can always opt for a universal remote for your TV! In this guide, our technical and audiovisual teams will show you all the necessary steps to program a Dish universal remote to a Vizio television so you can get back to watching without any interruptions.

Table of Contents

Programming Dish Remote Codes to Vizio TVs

The process of integrating your Vizio TV and Dish remote will involve the utilization of remote codes. Encoding these four to five number combinations will create the connection between your TV and remote. They are listed below for your reference.

To start with the programming, here is the guide our technical team created:

1. Turn on the TV you wish to program with your remote control. Second, double check if your remote has been installed with working batteries. This way, you can proceed with the procedure continuously and without any interruptions.

2. Write down all the codes needed for the programming which are all located below. Doing so will help you lessen the time you will need to allocate for the process. 

3. On your remote control, find and press the TV button. 

4. To proceed with the “Learning Mode,” press and hold the SETUP key until a light flashes on your remote.

Dish Tv Remote

5. Prepare the codes that you have gathered from the list. Enter a code using the number buttons on your remote control. Make sure that the three, four, or five digit code you provide is corresponds with your remote or TV type.  

6. To verify if the code worked, press the power button on your remote. If the device turns off, it means that you have successfully programmed your remote towards your TV. 

7. To further confirm if it is fully functioning, turn the TV back on and test out multiple keys and see if it responds to specific commands such as volume, channel, and others. 

If it doesn’t, you have to repeat the process from the start and use another code from the list.

Our team wants to assure you that it’s completely normal to fail on your first attempt. All you need to do is try another code until it seamlessly works with your TV. This is the reason why there are a number of codes for each remote or TV type. 

Vizio Television D Series

Dish Network Universal Remote Control Codes for Vizio Televisions

3-Digit Codes (20.1-21.1) for 20.1 & 21.1 Dish Remotes

  • 627 511 593 505 553 535 598 773 551 809 523 562 625 293 564 575 506 301 766 583 888 718 013 741 401 113 607 615 502 048 101 590 123 326 539 719 000 693 424 447 908 485 520 555 738 242 527 011 453 518 666 500 515 720 763 521 744 504 561 543 115 150 004 789 683 015 632 455 897 768 599 353 821 777 032 533 512 785 100 767

3-Digit Codes (20.0-21.0) for 20.0 & 21.0 Dish Remotes

  • 505 627 511 523 535 593 598 553 562 575 773 520 551 625 502 809 720 564 766 945 301 293 401 888 198 615 302 000 506 677 013 515 583 802 718 011 777 326 741 111 100 113 141 447 500 607 267 776 048 501 242 605 101 590 518 002 123 001 738 539 115 808 719 655 693 143 453 424 527 637 908 508 121 485 152 555 333 789 503 748 666 303 507 763 943 521 004 744 531 504 451 561 220 543 591 150 683 015 632 455 897 768 599 353 821 032 533 512 785 767

3-Digit Codes (10.1) for 10.1 Dish Remotes

  • 505 627 522 775 758 885 864 756

3-Digit Codes (6.2) for 6.2 Dish Remotes

  • 505 627 825 758 756 775 864 885

3-Digit Codes (5.4-6.4) for 5.4 & 6.4 Dish Remotes

  • 627 766 520 506 523 505 006 773 706 155 666 553 565 775 652 440 786 500 444 678 741 458 629 585 720 672 073 888 670 232 222

3-Digit Codes (3.4-4.4) for 3.4 & 4.4 Dish Remotes

  • 627 766 505 506 678 232 510 123 760 127 500 515 458 593 000 670 001 525 631 606 047 911

3-Digit Codes (1.5 Blue Button) for 1.5 Blue Button Remotes

  • 627 505 006 758 864 001 756 885 775 679 766

3-Digit Codes (Platinum) for Platinum Dish Remotes

  • 505 627 775 537 848 756 885 864 758

3-Digit Codes (Platinum Plus) for Platinum Plus Remotes

  • 627 505 766 775 864 758 756 885

3-Digit Codes (Basic) for Dish Network Basic Remote

  • 627 511 598 773 535 562 551 593 583 575 501 666 741

3-Digit Codes (EZRemote) for Dish Network EZRemote

  • 627 505 758 756 885 864 775

4-Digit Codes (40.0, 50.0, 52.0, 54.0) for Newer Models

  • 3758 1758 4723 1756 0864 0885 4905 1499 3358

Writer

Picture of Willie Greer
Willie Greer
Willie Greer is the founder of The Product Analyst. A cinephile, he has made it a personal quest to achieve the awesomest home theater possible. He now shares what he has learned through the years on the site, and has enlisted the help of tech-savvy colleagues in providing more insight about today’s most sought-after gadgets.