Programming Universal Remote Codes For JVC TV

By Willie Greer, Founder · Last updated June 15, 2026

How we research these guides. The Product Analyst is an independent, buy-and-test home-theater site. For a codes reference like this one, we don’t review hardware — we compile the numeric codes our readers actually need, cross-check the programming steps against JVC’s own documentation and the major universal-remote brands (GE, RCA, One For All, and the big cable providers), and keep the list dated so you know it’s current. Every code below is reproduced exactly as published; we never alter or invent a code.

The most commonly used JVC universal remote codes are the 4-digit codes 0653, 0053, 0060, and 0067. Enter one with your remote’s SETUP or CODE SEARCH button, then test the power and volume keys. If the first code fails, work through the full 3-, 4-, and 5-digit lists below, or use auto code search.

JVC Universal Remote Codes: Full List (3, 4 & 5-Digit)

Universal remotes identify each brand by a numeric code. The right JVC TV code depends on which remote you own — some use 3 digits, others 4 or 5. Find your remote’s code length below, try the first code, and if it doesn’t take, move down the list. Start with 0653 or 0053; these are the most widely reported working codes for JVC sets.

3-Digit JVC TV Remote Codes

If your universal remote prompts for a 3-digit code, use one of these. They’re common on older GE and cable-provider remotes.

4-Digit JVC TV Remote Codes

Most modern universal remotes — including RCA, One For All, and Philips models — use 4-digit codes. The best-known JVC entries here are 0653, 0053, 0060, and 0067.

5-Digit JVC TV Remote Codes

Some One For All and newer cable-box remotes use 5-digit codes (often a “1” prefix on the 4-digit value). Try these if your remote asks for five digits.

JVC TV Codes by Remote Brand

Don’t know which code to start with? Pick your remote’s brand below. These are the codes most often reported as working for JVC TVs on each system — if your remote’s manual lists a different primary JVC code, follow the manual first.

GE Universal Remote Codes for JVC TV

For a GE universal remote (4-digit models), try JVC codes 0653, 0053, 0060, 0067, and 0141. Older 3-digit GE remotes use 012, 026, or 066. Put the remote in TV mode, press and hold SETUP, then enter the code.

RCA Universal Remote Codes for JVC TV

RCA universal remotes typically use 4- or 5-digit codes. Start with 4-digit 0653, 0053, or 0060; on 5-digit RCA models try 10053, 10650, or 11774.

One For All Remote Codes for JVC TV

One For All remotes use 4-digit codes on most models and 5-digit codes on newer ones. Try 0653, 0053, and 0067 (4-digit) or 10053 and 10160 (5-digit). If none work, One For All’s built-in auto code search will scan its full JVC library.

Spectrum, Xfinity, and Comcast Remote Codes for JVC TV

Cable-provider remotes usually use 3-digit codes for the TV. For JVC, common entries are 012, 557, 065, and 901. Better still, use the provider’s official remote setup: Spectrum and Xfinity (XR2/XR11/XR15) both offer an on-screen or web-based Remote Code Lookup that auto-detects the right JVC code.

How to Program a Universal Remote to a JVC TV

There are three reliable ways to pair a universal remote with a JVC TV: auto code search (the remote scans its database for you), manual code entry (you type a code from the lists above), and brand search (you pick “JVC” from an on-screen or app menu). Manual entry is fastest when you have a working code, so start there.

Method 1: Manual Code Entry (fastest if you have a code)

This is the refreshed version of the classic 7-step process. Have your code list ready before you start.

1. Find your codes first. Pick the JVC codes that match your remote’s digit length from the tables above so you’re ready when prompted.
2. Fit fresh batteries in the remote and switch on your JVC TV. A weak battery is the most common reason programming silently fails.
3. Press and hold the SETUP button until the indicator light flashes, then stays lit. This is the remote’s “learning mode.”
4. If your remote has a device button, press the TV button now so the code is stored under the right device.
5. Enter a JVC code using the number keys (start with 0653 or 0053). When a code is accepted, the indicator light usually turns off — that’s your confirmation.
6. Test it. Press POWER; the TV should turn off. Wait a few seconds, turn it back on, and try volume and channel keys.
7. If nothing happens, repeat from step 3 with the next code on the list until one sticks.

Method 2: Auto Code Search (when you don’t have a code)

No working code? Let the remote find one. Auto search walks through its entire code database until the TV responds.

1. Turn on your JVC TV and point the remote at it.
2. Press and hold SETUP (or CODE SEARCH) until the indicator light stays on.
3. Press the POWER button once, then tap it repeatedly — the remote sends one code per press.
4. The moment the TV switches off, stop pressing. The remote has found a working code.
5. Lock it in by pressing SETUP or ENTER. Because it tests the whole database, this can take several minutes — be patient and tap slowly.

Method 3: Brand Search (cable and app remotes)

Spectrum, Xfinity, and One For All remotes can skip the numbers entirely. Open the remote’s on-screen setup (or its companion app), choose JVC from the brand list, and follow the prompts — the system selects and tests the code for you. This is the easiest route if your remote supports it.

How to Find the Right Code for Your JVC TV

If you’re not sure which code to try, narrow it down with your TV’s model number and your remote’s own manual. Here’s the quickest path:

• Find your model number. Check the sticker on the back of the TV, or go to Settings > About (or System Information) on screen. The model usually starts with “LT-” or “EM-“.
• Check the remote’s manual first. Most universal remotes list a primary JVC code on a card in the box or in the brand index of the manual.
• Try the defaults. For 4-digit remotes, 0653 and 0053 are the most widely reported JVC codes — start there before working down the list.
• Match the digit length. Only enter codes that match what your remote asks for (3, 4, or 5 digits). Using the wrong length is a common reason a code “won’t take.”

Programming a different remote? We have step-by-step code guides for GE 4-digit universal remotes, RCA universal remotes, ByJasco remotes, and Colorways universal remotes. If no code works, learn how to program a universal remote without codes.

JVC TV Not Responding to the Universal Remote? (Troubleshooting)

If your JVC TV won’t respond after programming, the code is rarely the only culprit. Work through these fixes in order — most failures come down to power, line of sight, or a stale setup.

• Replace the batteries. Weak batteries send a faint IR signal that programs erratically. Fresh batteries fix this more often than any code change.
• Clear the line of sight. The remote needs an unobstructed path to the IR sensor on the front of the TV. Move anything blocking it.
• Kill the interference. Direct sunlight, plasma displays, and some LED bulbs flood the IR sensor. Dim the room or change your angle and retry.
• Reset and re-enter a different code. Pull the batteries for 60 seconds, reinsert, and program an alternate JVC code from the list — the first one may simply be wrong for your model.
• Switch to auto code search. If manual codes keep failing, run Method 2 so the remote tests its whole database automatically.
• Confirm it’s a TV-control remote. Some streaming and pair-only remotes can’t drive a TV’s power and volume by IR at all — check that yours supports universal TV control.
• Power-cycle the TV. Unplug the set for 10 minutes, plug it back in, and reprogram. This clears a stuck IR controller.
• When all else fails, suspect hardware. A dead IR sensor or failed remote board needs service — contact JVC support (linked in the FAQ below).

Frequently Asked Questions

What is the universal remote code for a JVC TV?

The most commonly used JVC TV codes are 4-digit 0653, 0053, 0060, and 0067. There isn’t one single code for every remote — the correct one depends on your remote’s brand and digit length. Start with 0653 or 0053, then work through the full 3-, 4-, and 5-digit lists above if needed.

What is the 4-digit code for a JVC TV?

Common 4-digit JVC TV codes include 0653, 0053, 0060, and 0067. These work on most 4-digit universal remotes, including RCA, One For All, and Philips models. Enter one after holding SETUP; if it fails, the full 4-digit table above lists every published code to try.

How do I program a universal remote to my JVC TV?

Hold SETUP until the indicator light stays on, press your remote’s TV button, then enter a JVC code (try 0653 first). The light turns off when the code is accepted — test POWER and volume to confirm. If you have no code, use auto code search: hold SETUP and tap POWER until the TV switches off.

What do I do if no JVC code works?

Use auto code search so the remote tests its entire database automatically (hold SETUP, tap POWER until the TV turns off, then lock it with SETUP/ENTER). Also confirm you’re using codes that match your remote’s digit length and that your remote actually supports universal TV control rather than being a pair-only streaming remote.

Why won’t my JVC TV respond to the universal remote?

The usual causes are weak batteries, a blocked line of sight to the IR sensor, or IR interference from sunlight or LED lighting. Replace the batteries, clear the path to the sensor, then reset the remote (batteries out for 60 seconds) and re-enter a different JVC code. If it still fails, the IR sensor may need service.

How do I program a Spectrum or Xfinity remote to a JVC TV?

Use the provider’s guided setup rather than a raw code. Spectrum and Xfinity (XR2/XR11/XR15) both offer an on-screen or web-based Remote Code Lookup that detects your JVC code automatically. If you prefer a manual code, try 3-digit 012, 557, or 901, and reset by pulling the batteries for 30 seconds before reprogramming.

Does code 0053 work on all JVC TVs?

Code 0053 is one of the most commonly reported working codes for JVC sets, but it isn’t guaranteed on every model. If 0053 doesn’t respond, try 0653, 0060, or 0067, then work down the full 4-digit list. Auto code search is the reliable fallback when no single code works.

Can I use a universal remote with a non-smart JVC TV?

Yes. Universal remotes control JVC TVs over infrared (IR), so no Wi-Fi, app, or pairing is required. As long as the TV has an IR sensor — which nearly all non-smart JVC sets do — you can program it with manual code entry or auto code search exactly as described above.

For the official, manufacturer-maintained code references, check your remote’s manual or JVC support.

One last note carried from the original guide: codes are designed for a specific brand and device type, so once you’ve matched a JVC code to your remote you should have few compatibility issues going forward.