Programming Dynex TV Remote Codes

Have you ever been so stressed about having to guess, identify and deal with a lot of remote controls and all you have to do is just experience entertainment which you totally deserve? Most people would understand the frustration because most people experience the same issues over and over again. 

Table of Contents

Programming Dynex TV Remote Codes

But entertainment doesn’t have to be that hassle. This is why as part of the byproduct of technological advances, codes were made. Codes are uniques set/s of numbers that create a universal command through programming. Codes are the ones to be encoded correctly and properly unto the device. These are designed specifically for the device and brand. Although this seems light to hear what you have to pay attention to in the process. Along with it, you may encounter and probably spend a lot of time encoding to the device and having to repeat some steps to make it all work. This also goes to say that for every wrong, your patience will also be tested so you better work on it too. The key to accomplishing the task is to focus and to stretch out your patience especially if you’re not that tech-savvy. 

Remember the saying all good things come to those who work on it? This is pretty much applicable to this whole task because this may take a la considerable amount of your effort and patience. But also remember that even though having to deal with those is already draining, having to experience hassle-free entertainment is just worth it. Watch out on this article for the detailed step by steps process to serve as your future reference too.

1. Make sure to check your remote control and the devices you intend to program with it.  

2. From the list of codes found below, get the codes designated for your device. This will help you avoid interruption later when the codes are being asked. 

3. To start, press and hold the TV and SEL button. Wait for the remote lights to lit up before releasing the buttons.

Spectrum Remote

4. The device’s screen will prompt an instruction asking for the codes, enter them using the number keys. 

5. To confirm if the code actually works, try pressing the VOL UP button and verify if follows the command. 

6. Once done, press and hold the TV button to store the code that you have entered earlier. If the light blinks twice, it has been stored. 

7. Turn off your device and turn it back on after a few seconds. Once it’s on, test out a few keys to see if it follows the commands. 

Dynex TV

8. Repeat the same process if you wish to program other devices. 

Backup codes are provided in case the first code you choose won’t work. These instances are very usual. The key is to follow the instructions properly and enter the codes correctly. 

Remote Control Codes For Dynex TVs

5-Digit Remote Codes for Dynex TV

  • 10463
  • 11463
  • 11780
  • 11785
  • 10180
  • 10178
  • 10171
  • 10623
  • 11963
  • 10096
  • 10463
  • 10154
  • 10463
  • 10180
  • 10178
  • 10171
  • 10623
  • 11963
  • 10096
  • 10236

4-Digit Remote Codes for Dynex TV

  • 10463
  • 11463
  • 11780
  • 11785
  • 0177
  • 0185
  • 0282
  • 0039
  • 0280
  • 0038
  • 0154
  • 0236
  • 0463
  • 0180
  • 0178
  • 0179
  • 0019
  • 0623

Writer

Willie Greer
Willie Greer
Willie Greer is the founder of The Product Analyst. A cinephile, he has made it a personal quest to achieve the awesomest home theater possible. He now shares what he has learned through the years on the site, and has enlisted the help of tech-savvy colleagues in providing more insight about today’s most sought-after gadgets.