If you want to operate your television and other devices using your Suddenlink remote control, you will need to do some basic programming. All you need is to input a specific code to program your remote to a device. Programming your remote control will enable you to operate all of your devices just by using one tool. This basically means you won’t have to deal with separate remotes for each of your devices. To further assist you on that one, on this page, you will be given a step-by-step procedure on how to properly conduct the programming.
Table of Contents
Programming Suddenlink Remote Codes
Aside from that, a list of codes will be provided below as well. Navigate through the list to get the codes for your device. It would be more convenient if you gather the codes before you begin the procedure so you can conduct the process faster and easier. As the programming procedure may take a few hours, better do it during your free time to avoid interruptions during the process.
Here’s you can program your Suddenlink remote on your device:
1. Put new or fully charged batteries on your remote to avoid any interruptions. Next, check and turn on your device.
2. Point your remote towards the device properly so it can easily pair.
3. Press the power button along with the device button.
4. Press and hold the SETUP button. The LED light will blink green three times after a few seconds.
5. Enter the code, make sure you enter it in the correct order to avoid any errors during the next
6. Once the code is entered correctly you may now try to use the buttons of your remote and check if it now works. Try to check as many as possible. If some buttons don’t follow the commands, repeat the steps and apply a new code.
7. This procedure can be used on your other devices if you wish to program more entertainment equipment.
Please expect that some codes might not work. This is why multiple codes are being provided. Just choose and use the codes below until it works on your end.
Suddenlink Universal Remote Control Codes
Here are the codes for the Suddenlink remote. You can try any of these remote codes below to sync your universal remote to your TV.
- 1376
- 1877
- 51982
- 51376
- 53560
- 51877
- 56281
- 58392
- 53729
- 59302
- 50938
