Were there times that you’ve had troubles with your entertainment equipment? Is it because of your multiple remote controls? If yes, then don’t worry because this article will give you what you need.
Table of Contents
Programming Sony Remote Codes For Comcast
Codes, to start with, are the things you need to enter to eliminate the hassle of having to use multiple remote controls. These codes does all the necessary programming — or magic if you’d call it that way – that condenses all functions of your remotes to a universal or singular remote control. These codes are designed specifically the brand and device type that you have so you are ensured of compatibility.
One thing about this method is that there is a requirement of carefully entering the codes and of putting extra patience throughout the process as it is inevitable that we encounter repetition of previous steps and some errors.
You have to put in mind that this is quite tedious but the results are worth it, that’s for sure. To provide you further help, here’s a walkthrough on you can program your Comcast remote for Sony Devices:
1. Turn on both your setup box and TV. Make sure that your remote control is fully working along with the batteries you installed.
2. Secure the codes that are designated for your device’s brand. Those are the ones the will only work.
3. Press and hold the SETUP button until the red light turns green. After that, release the button.
4. Using the number buttons on your remote, enter the four or five-digit code based on the codes you gathered.
5. If the code is correctly entered and is working, the LED light on your remote should flash or blink twice. Make sure that you’ll notice it so you can confirm that it worked.
6. Now, aim your remote towards the device and press the power button on your remote control.
7. If the TV turns off, it is an indicator that you have successfully programmed the remote control towards your device.
8. To further verify, turn your TV on and try to use any buttons on your remote and confirm if it follows the command as expected. If it didn’t, you will have to repeat the process from the beginning but you’ll have to use another code.
It is completely normal that you won’t successfully program your remote during the first try. Don’t get frustrated yet as there are other codes that would definitely work. Once the procedure worked on your first device, just repeat and apply the same process on the other devices.
Sony TV Codes For Comcast Universal Remote Controls
Here are the codes that will work in programming your Comcast remote towards your Sony TV and devices:
5-Digit Codes (XR2, XR5, XR11, XR15) for Newer Xfinity Remotes
11100 10810 10000 11685 10011 11791 10353 11786 10834 12337 11317 11712 11400 11913 11904 11925
5-Digit Codes (Digital Adapter Remote)MUG3067
10000 10011 10273 11317 10353 10834 10080 11400 11685 11786 11791 11904 11925
4-Digit Codes (Silver with Gray OK Select Button)
0000 0111
5-Digit Codes (Silver with Red OK Select Button) MUG1067
11100 10000 11317
5-Digit Codes (Spectrum & Tracer) MG3-4167 & M4167
10810 10000 10011 10080 11400 11685 11904 11925
