Do you love entertainment but are worried that you might just end up having to deal with all the confusion and guessing of choosing the right remote control? Your suffering ends here because due to technological advancements, this issue will now soon perish. How?
Table of Contents
Programming GE Universal Remote Codes for a Dynex TV
These codes were made specifically to a brand and device type that you have to ensure that there is compatibility with the two. These codes enable a centralized command on all remote controls. Take note that throughout the process you need to sharpen your eyes and carefully enter the codes otherwise, you might end up repeating the steps. Patience and focus are also key.
Once all this work is done, you will be at ease knowing that you don’t have to deal with multiple remote controls to make your entertainment equipment work. If you wanna know you can achieve such a convenient entertainment experience, here’s a quick detailed tutorial on how you can program your GE remote control on your Dynex TV and other devices:
1. To avoid inconvenience in the middle of the process, list down the codes designated for your device. You can the codes in the list provided below.
2. Once you got the codes, check your devices and remote control. Make sure it’s all turned on and working.
3. Point your remote control towards your device and press the TV button.
4. To start the procedure, your device should be on Learning Mode. Press and hold the SETUP button to do so.
5. Using the keypad or the number keys on your remote, enter and provide the four-digit code from the list that corresponds to the device that you are currently programming.
6. After providing the correct code, the device key will flash. The long flash will be your indicator that the code was received.
7. Press and release the power button to turn off your device. After at least one minute, turn it back on to test out other commands.
8. If the commands are all working, the programming was successful. However, if some keys work and others don’t, you’ll need to repeat the process and use another code.
If you wish to program other devices, apply the same method. See to it that the process is thoroughly followed to expect successful programming.
5-Digit Universal Remote Codes for Dynex TV
Here are the GE universal remote codes compatible with your Dynex TV and devices:
- 0623
- 11780
- 11963
- 11463
- 10171
- 11785
- 10463
- 10180
- 10463
- 10463
- 13811
- 10178
- 11963
- 13700
- 11314
- 10096
- 11931
- 10096
- 10154
- 19617
- 11810
- 10236
- 12184
- 10005
- 13153
- 10171
- 11963
- 17627
- 10154
