Entertainment is becoming a necessity for relaxation, and such experience wouldn’t be complete without a TV. But your time can immediately turn sour if you lose sight of your TV remote control. Our audiovisual team can relate to this struggle, so they made this guide on how to program your Seiki TV to a universal remote control – the perfect solution to lost or defective TV remotes:
Table of Contents
Programming Seiki TV Universal Remote Codes
To successfully program your Seiki TV with a universal remote, you need to make use of codes. These are unique number combinations that will establish the connection between your TV and the remote. Our team has provided all the sets of codes you need below this tutorial. To begin, here is the detailed step-by-step process of the task:
1. Gather and collect all the codes you need so you can provide it immediately later when needed.
2. Now that you have the codes with you, make sure that the TV you intend to program with the remote is plugged in and functioning. Turn that device on all throughout the whole process.
Also ensure that the remote has working batteries so it won’t cause any issue or interruptions throughout the process.
3. On your remote, press the TV button.
4. Next, press and hold the SETUP button for a few seconds until a light flashes. The light flashing will be an indicator that its in “Learning Mode.”
5. Once it’s on Learning Mode, enter the code you have gathered through the number keys of your remote control.
6. Point your remote control on your television, then press and hold the power button for a few seconds and release it only when it completely turns off.
7. If it did not turn off, the programming wasn’t successfully completed. In this case, you have to use another code and repeat the process.
8. But if the TV responds to the power button, it means that the programming was successful. To further confirm if the TV was integrated, turn it back on and test multiple remote keys and see if it follows specific commands such as volume, channel, and others.
Our team says that there are times that some codes won’t work and that’s normal. There are certain codes that will work on specific devices, all you have to do is find one that works. This is the reason why you need to allocate time when you want to program your remote.
Universal Remote Control Codes for Seiki TVs
3-Digit Remote Codes
- 564
- 627
- 000
- 505
- 450
- 506
- 111
- 520
4-Digit Remote Codes
- 4635
- 3953
- 4794
- 4346
- 1263
5751
5-Digit Remote Codes
- 12964
- 13559
- 13560
- 10178
- 13953
DirecTV Remotes
10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Comcast Remotes
11864, 10178, 0060
Cox Communications
0178
Atlas DVR Device URC
0178
Time Warner Cable
0178
Philips
0002
Bell Remotes & Dish Network
505, 506, 516, 523, 526, 566, 573, 612, 627, 647
ATT U-Verse
1004
Hitachi
0002
URC
2964, 0145
Cablevision Customer (Optimum)
004