With Blu-Ray players, you can access all sorts of content at your fingertips. But what if your Blu-Ray remote suddenly malfunctions? Using your player without a remote control can be a hassle, but today, there is always an alternative solution to everything, which in this case is a universal remote control!
If you want to program your Samsung Blu-Ray player with a universal remote, here’s how:
Table of Contents
Programming Samsung Blu Ray Remote Codes
Here is a step-by-step guide on how you can program a Samsung Blu-Ray player with a universal remote control:
1. Ensure that the player is turned on and your remote control is fully functioning before proceed with the programming steps.
2. List or save all the codes needed so you can directly provide them later on. You can find all the codes below.
3. Next, press and hold the SETUP button for a few seconds until the light flashes. The flashing lights are the indicator that it is in “Learning Mode.”
4. Once it’s on Learning Mode, enter a four-digit code through the number keys of your remote control.
5. Point your remote control on your player, then press and hold the power button for a few second. Only release it only when the player turns off.
6. If it turns off, it’s an initial sign that the programming process worked. To further ensure the player has been successfully programmed, use any buttons on your remote and check if the player follows the commands
If it didn’t, you will have to repeat the process from the beginning and use another code.
Universal Remote Codes For Samsung Blu-Ray Players
- 0199
- 12051
- 10812
- 10702
- 10060
- 20199
- 31868
- 10766
- 20573
- 11903
- 22069
- 11060
- 21075
- 20240
- 31295
- 31500
- 22329
- 22369
- 21470
- 22489
- 01877
- 21044
- 20820
- 10650
- 10814
- 22556
- 10178
- 20490
- 20045
- 01982
- 31304
- 20744
