If you have replaced or misplaced your original Samsung remote, a universal remote can take over the job once it is paired with the correct programming code. The tricky part is finding the right code from the hundreds available. This guide lists every working Samsung TV remote code our team has compiled, plus step-by-step instructions for each setup method so you can get your TV responding again in minutes. Last updated June 2026.
Quick answer: To program a universal remote to a Samsung TV, either run the auto code search (hold the device button until the LED blinks, then tap Channel + until the TV reacts and save) or enter a Samsung code directly using the remote’s keypad. Samsung codes are commonly 3, 4, or 5 digits long, and the codes in this guide work across Samsung TV models.
How we verify this guide: Every Samsung TV remote code listed here is cross-checked against Samsung’s own remote documentation and the programming tables published by major universal-remote brands (such as GE, RCA, Philips, and One For All), then grouped by 3-, 4-, and 5-digit length so they match what your remote prompts for. We re-test the auto-search and direct-entry steps against current Samsung model years and update the list whenever a code stops working.
How Do You Program a Universal Remote to a Samsung TV?
You can program a universal TV remote in two ways — with codes and without codes. Remote codes are usually four digits, but you will find some in three and five digits too. Each code is made for a particular TV brand or remote variant, so you may need to try a few until you land on the correct set. The infographic below shows both routes side by side.
Method 1: How Do You Pair a Universal Remote Without a Code (Auto-Search)?
The auto search method is convenient because the remote scans through all the codes stored in its memory and pinpoints the correct one to control the TV. No code lookup is required — you simply let the remote cycle through signals until the TV responds.
- Power on the TV you wish to program. Also check if the remote is functioning.
- On the remote, click on the device button for three seconds. You should see the light blinking on the remote at this point. This shows that it’s in programming mode.
- Steer the remote toward the TV. Tap the Channel + and Channel – keys.
- Signals will be displayed on the screen. Press the Channel Up and Down buttons until the device turns off.
- Validate the code by pressing Power.
- The TV should switch back on. Once it’s powered on again, you may check if it’s working adequately with the remote. Try to change the channels and volumes on your remote and see if the TV responds.
- Hit the Device key to save the code. The LED will flash twice to confirm the code has been stored.
Method 2: How Do You Program a Samsung Remote With Codes?
If you already have a code for your remote brand, direct entry is the fastest route. The catch is that not all remote controls include a manual, so you may need to try different codes until you arrive at the correct set. Here is the entire procedure for programming a universal remote control to a Samsung TV with codes.
- Ensure that the Digital Television Adapter is powered on and fully functioning.
- Point the remote to the TV set to establish connection.
- Hold the PROG key on your adapter’s remote until the LED light glows. Press INFO afterward.
- The remote will go into pairing mode. The light should flash to indicate that it is prepared for pairing.
- Input the Samsung TV remote code using the remote control’s keypad.
- To find out if the programming worked, the TV will show ‘Success‘. This means that the digits entered are correct and compatible with your remote and TV.
However, if the numbers entered are incorrect, the TV will show Sorry. At this point, you need to try another code from the list further down this page.
Can You Use a Samsung Phone as a Remote Instead?
Apart from the universal remote control, you can command your Samsung TV using a Samsung smartphone. Our team suggests this method for more straightforward access. If you happen to misplace your Samsung TV remote or universal remote, this is also a great option to try.
- First, download and install the SmartThings app from the App or Google Play Store.
- Open the app once installed.
- Use your Samsung account and input all necessary information to set up the application. Most times, it registers the phone automatically.
- On the homepage, find ‘Samsung TV’ and select the ‘Remote’ button.
- You can now view controls such as volume and channel on your smartphone. Try using the controls and see if your Samsung TV responds.
During the setup, you’ll need to share network information with the TV over a WiFi connection on your mobile device. Also, you can’t access the TV without a Samsung account. Bear these in mind before proceeding with this method. If your set is acting up after pairing, our guide to common Samsung TV problems can help you rule out hardware faults.
What Are the Samsung TV Remote Control Codes?
The Samsung TV remote codes below will work for all Samsung TV models. They are grouped by length so you can match them to whatever digit count your universal remote expects. If the first code does not respond, work down the list — many remotes store more than one valid Samsung code.
3-Digit Samsung TV Codes
- 516
- 738
- 601
- 858
- 000
- 523
- 667
- 652
- 420
- 522
- 043
- 185
- 133
- 006
- 017
- 171
- 515
- 083
- 060
- 037
- 333
- 228
- 110
- 229
4-Digit Samsung TV Codes
- 0556
- 1584
- 0037
- 0093
- 0178
- 1619
- 0208
- 0264
- 1630
- 0370
- 0064
- 1506
- 0812
- 0226
- 1774
- 1506
5-Digit Samsung TV Codes
- 10032
- 10812
- 10217
- 10427
- 10060
- 10178
- 10056
- 10329
- 10408
- 11959
- 10030
- 12051
Quick Reference: Which Code Length Do You Need?
| Code length | How many we list | When to use it |
|---|---|---|
| 3-digit | 24 codes | Older universal remotes that prompt for a short code |
| 4-digit | 16 codes | The most common format on modern universal remotes |
| 5-digit | 12 codes | Newer remotes and cable/DTA boxes that use long codes |
Related Samsung TV and Remote Guides
Already paired? Keep your set running smoothly by learning how to update a Samsung Smart TV so it gets the latest features and fixes. If you are shopping for a new screen, our roundup of the best Samsung TVs covers the current lineup. Using a different brand of universal remote? We also keep full code lists for RCA universal remotes and JVC TVs.
Frequently Asked Questions
How many digits is a Samsung TV remote code?
Samsung TV remote codes are commonly 3, 4, or 5 digits long. Universal remotes are usually four digits, but you will also find three-digit and five-digit versions depending on the remote variant. This guide lists working Samsung codes in all three lengths.
What do I do if none of the Samsung codes work?
If a code returns “Sorry” or the TV does not respond, try the next code in the matching length list. If no code works, switch to the auto code search method, which scans the remote’s stored codes automatically and finds the correct one without you entering anything.
Do these codes work for all Samsung TV models?
Yes. The Samsung TV remote codes in this guide are intended to work across Samsung TV models. Because universal remotes store codes differently, you may still need to try more than one code until the TV shows “Success” and responds to channel and volume commands.
How do I program a universal remote without a code?
Use the auto search method: power on the TV, hold the device button for about three seconds until the light blinks, aim the remote at the TV, and tap Channel + / Channel – until the set reacts. Press Power to validate, then press Device to save the code.
Can I control my Samsung TV without any remote?
Yes. Install the SmartThings app on a Samsung phone, sign in with your Samsung account, select your Samsung TV, and tap the Remote button. You will then have on-screen volume and channel controls. The phone and TV must be on the same WiFi network.
