If your device’s remote control is damaged, getting a replacement is recommended. However, the problem lies in configuring the new remote to your device by entering codes, which can be stressful to find.
You don’t have to go through the stress of trying different codes until you arrive at the right one, thanks to our team. This guide contains Charter universal remote control codes for configuration and all the steps how.
Steps in Programming a Charter Remote Control
The codes, usually four digits, are specifically made to your TV or device brand for the best pairing. If the remote isn’t paired, it will be impossible to operate the TV. Typically, the codes are found in the universal remote’s user manual or the website.
If you can’t seem to find any code on the website or manual, there’s no need to worry. Our team listed all the codes below the tutorials. All you need to do is scan through them until you find your device brand.
You can also program the remote to the TV by scanning the remote. It should be your next step if can’t find a working code for your device.
During scanning, the remote will search through all the available codes in its memory and will provide the correct one for the TV or device brand.
Scanning Method
Follow the process below to scan your remote.
- Turn on the device (TV, DVR [1], etc.)
- Press the button of the corresponding device on your remote.
- Press and hold the Setup button until it blinks twice.
- Input the numbers 9.9.1.
- Point the remote to the device and hit the Power button.
- Hold the Channel Up button until the device turns off.
- Select the Power button to turn the device on. Then, press the Setup button.
Programming With Codes for TV
If you don’t want to go through the scanning process, below is how to set up Charter remote codes for TV.
- Power the TV on that you want to pair up with the remote.
- Hit Power on the remote control.
- Press and hold the TV and SEL buttons. Wait until the LED light blinks twice.
- From the codes provided below, input the code for your TV. Use your remote’s keypad to enter the digits.
- After entering the numbers, check how your remote reacts. If the LED blinks once, it means the code you entered is correct. If it’s a long blink, it means the code you entered is incorrect.
- If the LED light blinks once, it’s time to test if the remote is fully programmed. Press the Power key to turn off the TV. You can know if the code you entered is correct if the TV turns off.
- If there’s no response, use another code and repeat steps two to five.
Now that you know how to pair your Charter remote to a TV, it might take a while for the codes method. If you want a more convenient option, our audiovisual team suggests opting for the code search method.
List of Charter Remote Control Codes
Here is a list of all Charter remote codes for various TV brands.
- Dynex: 2049
- Magnavox: 0171, 1365, 1755, 1867
- LG: 0178, 1768
- Philips: 1454, 1365, 2622
- Panasonic: 1927, 0051
- Samsung: 0812, 2051
- RCA: 0090, 1661, 1959, 2746, 3717
- Toshiba: 1343, 1935, 2684
- Sharp: 2360
- TCL: 2434
- Sony: 1685
- Vizio: 2707, 0885
- Zenith: 0178, 0047, 0463
