Having a backup remote is an excellent idea if you tend to frequently misplace your TV’s. The best type for this purpose are universal remote controls, as they are compatible to almost all brands and devices. Plus, they’re easy to integrate to your setup. For Sanyo TV users, here’s how to program an RCA universal remote codes for Sanyo TV entertainment setup.
Table of Contents
Programming RCA Universal Remote Codes to Sanyo TVs
Codes are an integral component to successfully program your TV and remote control. How do you incorporate them, specifically? There are select codes that are compatible with your TV or device, depending on their brand. This way, codes establish 100% stable connection and control over your device.
Below, we listed all the compatible codes for your Sanyo TV and RCA remote. Here’s the step-by-step guide on how to incorporate the codes:
1. First, gather all the codes by listing or screenshotting them. This will save you time later on during the programming process.
2. Turn your Sanyo TV on. Next, check your remote’s battery compartment and check if the installed batteries are working so you can avoid interruptions throughout the procedure.
3. Point your remote control to the TV and press the TV button on your remote.
4. Hold the button and wait until the power key turns off.
5. Now, you will need to enter the codes listed below using the number keys on the remote. Once the last digit of the code has been entered the power key should turn off.
6. Hold the TV button and wait for the TV to turn back on. If the TV turns back on, it means that it has been successfully paired with your remote.
7. To check if it has been fully programmed, test by clicking on several keys on your remote and see if the TV responds to the commands. If your TV responds to all the keys on the universal remote, it means that the programming was successful. You may now use the remote as a backup for your Sanyo TV.
8. However, if your TV didn’t follow the remote commands, you need to use another code and restart from step 1.
Do not be discouraged, because not all codes will work on your TV and remote. Take the time and try another code until you get the TV and remote to perfectly work together. Our technical team advises to closely follow the same steps properly and don’t omit any important instructions.
Sanyo TV Codes For RCA Remotes
3-Digit Codes (v.1) for RCU300, RCU310, RCU410, Etc.
- 004 048 049 073 080 107 162 169 180 196
3-Digit Codes (v.2) for RCU400R3, RCU500, Etc.
- 017 021 039 056 057 058
3-Digit Codes (v.3) for RCU300T, RCU404, Etc.
- 052 077 089
4-Digit Codes (v.1) for RCR350, RCR450, RCR815, Etc.
- 1004 1048 1049 1073 1080 1107 1162 1169 1180 1196
4-Digit Codes (v.2) for RCR612, RCR812, RCR860, Etc.
- 1004 1049 1073 1089 1095
4-Digit Codes (v.3) for RCR412B, RCR3273/3373, Etc.
- 1047 1204 1078 1080 1121 1129 1163
4-Digit Codes (v.4) for RCR804BR, RCRH02BR, Etc.
- 0154 1756 4398 1480 2434 0885 0054 3183 1142 0706 0088 3488 2049 0799 0893 1362 3697 3861
5-Digit Codes (v.1) for RCRN08GR, RCRPS02GR, Etc.
- 10054 11756 14398 11142 10885 13488 13183 12434 12049 11362 11480 11785 11564
