Having a handful of remote controls at home can be an eyesore. It can also be a hassle to choose which remote to use for a device, consuming your time for relaxation. If you want to get rid of unnecessary clutter or create a more convenient setup, our technical team will show you how to program a universal remote control – the most ideal alternative to a number of remote units. Here are the steps on how to program a Vibe remote control unit:
Table of Contents
Programming Vibe Universal Remote Codes
To make your setup more simple, the universal remote control assumes single-handed control over a number of devices. There are particular codes to use for every universal remote brand, which in this case, for Vibe remotes. It’s very simple to program a Vibe remote control, since all it takes are trial and error of codes.
For your convenience, we listed all the codes below this tutorial. Know how you can program them in a few steps in this guide:
1. The first ideal thing to do is to collect the codes you need for the programming. List them down on paper or take a screenshot that you can use later.
2. Next, test your remote if it is fully functioning. Inspect the battery compartment if it has working batteries.
3. To enter SETUP Mode, press and hold the SETUP button. After several moments, you will notice the LED light blinking or flashing. Once this happens, release the button. The LED light should remain on.
4. Now, you need to enter a code from the list below. Make sure that you entered a correct code from the list in order to avoid any errors. Point your remote control to the TV and press the power button.
7. If the device turns off, it means that the code worked and that the TV and remote were programmed successfully. Now, turn your TV back on to test out a few more commands.
8. If the TV follows the commands correctly from your remote, it means that the programming has been completed.
9. However, if it doesn’t you need to do the same process all over again, but use another code from the list.
Viber Universal Remote Control Codes
- 0009
- 0456
- 0049
- 0004
- 0135
- 0044
- 0005
- 0001
- 0007
- 0475
- 0472
- 0137
