Some people would consider entertainment as a staple for their leisure but the downside most people experience is having to deal with a lot of remote controls to activate entertainment equipment and devices and instead of relaxing, they end up stressed or if not, having appetite loss for some entertainment which is kind of a sad story.
Table of Contents
Programming Insignia DirecTV Remote Codes
But there’s actually one good thing technological advancements have to offer to remedy this kind of issue. Codes! Codes are a set of numbers that when correctly and properly into the device creates a universal command across all entertainment equipment and devices. This way a person is able to experience a less hassle entertainment because he or she doesn’t have to go through a relentless guessing and identifying of multiple remote controls. A person doesn’t also have to worry about compatibility because codes are mostly and specifically designed and tailored to fit the device type and brand that you have. Although this seems to be easy to do, it might not be the case, especially if you’re not a tech-savvy person. This task requires a lot of patience and a huge amount of focus all throughout, otherwise, he or she may encounter repetition of steps as well as having his or her temper shortened and mood ruined.
It will all be worth it in the end because after all the required things a person must comply throughout the process, he or she will soon experience the kind of entertainment that he or she truly deserves. For a more detailed step by step process, kindly refer to the tutorial below which will also serve as your future reference.
1. Go to the list of codes found below. Write down the codes designated for your device. By doing so, you’ll be able to immediately provide the codes when asked during the process.
2. Check the batteries of your remote and turn on all the devices you wish to program with it.
3. Always aim your remote control in order for it to easily detect the device and it will pair and synchronize immediately.
4. To prepare your device for the programming, press and hold the SETUP button until the LED light lights up. This is an indicator that it’s already in Learning Mode.
5. When the device is on Learning Mode, the screen will prompt an instruction asking for the code. Enter the code using the number keys
6. Aim your remote control on the device then press and hold the power button.
7. Only release the power button if the device finally turns off.
8. To know if the programming was successful, after a few seconds, turn on your device once again. Test out some remote commands and verify if it follows the corresponding commands.
9. If some commands don’t work, you’ll have to repeat the process and use another code. But if it does, apply the same steps to your other devices and use codes based on its device type.
Don’t worry if it doesn’t work on the first try, it usually happens. Just follow the steps properly and utilize the alternative codes provided until it will work.
Insignia TV Codes For DirecTV Remotes
5-Digit Codes (RC6x) for RC64, RC65, RC66, RC32, RC24
12049 11756 12434 10885 11564 11423 11204 11517 10171 11710 10463 10706 12360 11780 12751 12002 12432 12184 12088 12417 11963 11892 11785 11641 11385 11326 10842
5-Digit Codes (RC7x) for RC71, RC72 and RC73
12049 12434 10885 11423 11564 10818 10171 10178 11517 12751
