How to Reset an LG Soundbar (All Methods)

Soft reset vs. factory reset — which do you need?

“Reset” means two very different things on an LG bar, and mixing them up is how people wipe settings they didn’t need to. Pick the gentlest one that matches your symptom.

• Soft reset = power-cycle, Bluetooth re-pair, network reconnect, or subwoofer re-link. Fixes most connection problems, keeps every setting, and is reversible. Try first.
• Factory reset = a full wipe to out-of-box state. It erases EQ, sound modes, paired devices, and network details, and is irreversible. The display confirms it with E2P CLR. Last resort only.

Escalation ladder — match symptom to the gentlest fix

1. No sound / frozen → power-cycle
2. Won’t connect over Bluetooth → re-pair Bluetooth
3. Wi-Fi / app unstable → reset network settings (model-dependent)
4. Wireless sub dropped → subwoofer “WL Reset” re-pair
5. Still broken after all of the above → factory reset (irreversible)

Soft reset / re-pair — fixes most problems, loses nothing

This is the first thing to try for almost any LG soundbar problem. None of these touch your EQ, sound modes, or saved devices — they just clear temporary faults or re-establish a connection.

A · Power-cycle — the 30-second fix (safest — start here)

Use when the bar froze, has no sound, or is “connected but silent.”

1. Turn the soundbar off, then unplug it from the wall for 10–30 seconds.
2. Plug it back in and power it on.
3. This clears temporary memory faults behind freezes, dropouts, and “connected but silent” states. It loses nothing — a power-cycle isn’t a reset, so if it works, you’re done.

B · Reset / re-pair Bluetooth (no data lost)

Use when the bar won’t connect to your phone or TV over Bluetooth.

1. Switch the bar to Bluetooth (BT) mode using the function/input button.
2. On the phone or TV, open Bluetooth settings and “forget” / remove the soundbar from the paired list.
3. Put the bar back into pairing mode and pair again from scratch.
4. Still no luck? Move the devices closer together and clear obstructions/interference.

Note: the function/input button that selects BT is labeled differently across models (often F, Function, or Input) — check your manual if you’re unsure which button cycles to BT.

C · Reset the Wi-Fi / network settings (model-dependent — important)

Use when the bar drops off Wi-Fi or won’t connect in the LG Soundbar app. This is the one combo that behaves oppositely across models, so match yours:

Re-pair the subwoofer (“WL Reset”) — when the sub dropped out

If the wireless sub dropped out or won’t reconnect, you don’t need a factory reset — re-pair it. The “WL Reset” relinks the bar and sub without touching any other setting (LG support — pairing soundbar and wireless subwoofer).

1. Press Stop on the soundbar, then hold the number 6 on the remote for 5 seconds.
2. The display shows “WL Reset.”
3. Press the Pairing key on the back of the subwoofer for 5 seconds.
4. Red and green lights flash alternately.
5. Unplug the soundbar from the subwoofer; check the lamp has gone off.
6. Plug the power cord back into both devices.
7. The green light on the sub stops flashing quickly.
8. Hold Mute on the subwoofer and Stop together for several seconds.
9. Paired — the green LED stays solid when the two are linked.

Tip: keep the sub within ~15 ft of the bar with clear line of sight. A persistent red LED that never turns green usually means the sub needs service. Sources: LG support — pairing soundbar and wireless subwoofer; LG support — connecting your wireless subwoofer.

Factory reset — full wipe (last resort)

This is the nuclear option. A factory reset returns the bar to out-of-box state: it erases every setting — EQ, sound modes, paired devices, and network details — and it cannot be undone. Use it only when soft fixes and a sub re-pair have all failed. When it completes, the display shows E2P CLR (LG’s on-screen confirmation that the EEPROM clear succeeded) and the bar powers off automatically (LG support).

A · Factory reset WITH the remote (standard combo) (last resort — irreversible)

1. On the soundbar, locate the Volume Down (−) button.
2. Hold Volume − on the bar together with Sound Effect on the remote, simultaneously, for 5 seconds or more.
3. The display shows E2P CLR, then the bar powers off automatically. Reset complete.

The remote button is model-specific. LG’s official support article enumerates these by name — the full map is in the reference table below. The most common combo is Volume − + Sound Effect, but several families differ (LG support).

B · Factory reset WITHOUT the remote (on-bar combos) (last resort — irreversible)

Use when soft fixes failed and you don’t have the remote. Hold each combo for ~10 seconds. LG doesn’t officially enumerate no-remote combos by current model, so treat these as the combos owners most commonly report and confirm against your manual:

• Input/(F) + Bluetooth — held ~10s
• Power + Bluetooth — held ≥10s
• Power + Volume Down — held ~10s

Source: LG support — “How can I reset the sound bar?” (factory-reset combos, per-model remote buttons, and E2P CLR).

Reset the soundbar’s remote (front-panel)

If the remote misbehaves, trigger a reset from the bar’s front-panel buttons (check your manual if the panel labels differ):

1. Find Volume Down and Sound Effect on the front control panel.
2. Hold both for a few seconds.
3. The reset screen appears on the soundbar’s display panel.

Source: LG support — “How can I reset the sound bar?”

Which combo for which model? (reference table)

Match your model family to its soft-reset behavior and factory-reset combo. Where LG names a model for a combo, it’s cited as LG-confirmed; where LG doesn’t enumerate a current model, the combo is the consensus owners and how-to sources report — confirm against your manual before a full wipe (LG support; S95TR manual, p.20).

LG’s official article enumerates the legacy combos by name: LAS855/750/550/450, SH5/SH7/SH8, SJ5/SJ7/SJ8/SJ9 → Volume − + Sound Effect · SJ2 → Volume − + Standard Sound Field · SH2 → Volume − + Standard Sound · SK5Y → Volume − + Auto Sound Field · NB4530A / NB2430A → Stop (■) + 0 · NB5540 / NB4540 / NB3540 → Volume − + 0 (LG support).

Fix it or replace it? The honest math

If you’re replacing: three picks by budget

Straight from our soundbars-under-$300 guide and our Dolby Atmos soundbar guide — same picks, same cited reasoning, condensed to one line each. (Honest note: none of our current picks happen to be LG bars.)

Affiliate note: buy through a link below and we may earn a commission — at no extra cost to you. It never sways the picks.

BUDGET

Polk Audio Signa S4 — 3.1.2 + sub

The best overall in our under-$300 guide: the rare cheap bar with genuine up-firing Atmos and eARC for lossless soundtracks, plus a dedicated center channel — reviewers measured clean peaks around 84–102 dB with notably clear speech (Digital Trends / TechHive). Height effect is subtle; sub won’t shake the room.

Check price on Amazon →

BEST VALUE

Samsung HW-Q800F — 5.1.2 + sub

Our Atmos guide’s mid-range sweet spot: two real up-firing drivers and a wireless subwoofer included, decoding both Dolby Atmos and DTS:X (Samsung) — about $999 list and frequently around $700 (TechRadar). Rears aren’t in the box but can be added wirelessly later.

Check price on Amazon →

UPGRADE

Samsung HW-Q990F — 11.1.4 + sub + rears

Our Atmos guide’s best overall: an 11.1.4 system with 23 drivers and four real height channels, with the sub and rear speakers included (Expert Reviews) — TechRadar says it “solidifies Samsung’s place atop the Dolby Atmos soundbar food chain.” Roughly $1,599 list (What Hi-Fi), discounted often.

Check price on Amazon →

Full comparisons — every pick, what “real Atmos” actually means, and the spec traps to avoid: the best Dolby Atmos soundbars → — or, if the budget is firm, the best soundbars under $300.

✉ Want to catch a replacement on sale? Soundbar prices swing hard around sale events — get our free deal alerts →

Frequently asked questions

Is there a reset button on an LG soundbar?

No — there’s no dedicated physical reset button. You reset with a button combination on the bar, or on the bar plus the remote, and only the combo varies by model (LG support).

How do I reset my LG soundbar without the remote?

Hold one of these on-bar combos for ~10 seconds: Input/(F) + Bluetooth, Power + Bluetooth, or Power + Volume Down. LG doesn’t publish no-remote combos by current model, so confirm the exact combination in your manual (LG support).

How do I factory reset my LG soundbar?

Hold Volume − on the bar plus Sound Effect on the remote (or the model-specific button — 0 on NB-series, Standard Sound Field on SJ2) for 5+ seconds until E2P CLR appears and the bar powers off (LG support). The full per-model map is in the table above.

How do I reset my LG soundbar and subwoofer (re-pair)?

Press Stop and hold 6 on the remote for ~5 seconds until “WL Reset” shows, then hold the Pairing key on the back of the subwoofer for 5 seconds and let the two relink (green LED solid = paired). You don’t need a factory reset for this (LG support).

What does E2P CLR mean, and can I undo a factory reset?

E2P CLR is LG’s on-display confirmation that the factory reset (an EEPROM clear) succeeded; the bar then powers off automatically. It’s irreversible — all settings are erased and can’t be recovered, which is exactly why a factory reset is the last resort (LG support).