Have you ever thought about how to handle your Boston Acoustics soundbar if the remote went missing? It is good to know how to add the Boston Acoustic soundbar remote codes with a Universal Remote so you can avoid such blunders. Our experts have detailed how to do it fast and easy with the following guide.
Table of Contents
Programming Universal Remote for Boston Acoustics Soundbar
To program the universal remote for your Boston Acoustic soundbar, follow the steps below:
1. To ensure that the remote works properly, you need to turn both the soundbar and the device on.
2. If you select the Device and press the SETUP button on the remote, an LED will begin to blink.
4. The Device now accepts the codes listed below as the Device has entered learning mode. Add the codes one by one until you find the best one.
5. If the light stops blinking, it means that you’ve entered the correct code.
6. Most of the time, a few buttons work after adding the code, but other buttons stop working. It is because the code is not matched correctly to the Device. Therefore, you must check all the buttons to get the correct code.
Keycode Method
You can try using a password or key code if any of the mechanisms mentioned above don’t work for you.
1. Turn on the devices by pressing the Power button with the remote.
2. Select the Device and hold the Setting key until a small light appears. It gives a signal that you can make the changes now because the Device is in learner mode.
3. It’s now time to enter the Keycode from the manual.
4. When holding the remote directly in front of the Device, press the “power on/off” button.
5. Let go of the button when the flashlight is off.
Code-Search Method
It may be possible to use code search instead of adding and checking code one by one to avoid the above method if it does not work for you. I’ll show you how to use the technique in these simple steps:
- Switch on the Device and look for the Setup key on the remote.
- Enter 9 9 1, which is a 3-digit code for programming the remote.
- The tiny light will begin to glow green.
- Control your Device by using the remote control. Please make sure that all of the buttons on the remote are functional on the Device.
- You could try adding a “0” before the 3-digit code if that doesn’t work. It will certainly work.
Method for TVee 30 Soundbar
If you have a Boston Acoustics TVee 30 soundbar, follow these steps:
1. Hold down the Power and Volume + buttons on the soundbar for three seconds or until the light flashes orange.
2. On the soundbar, press the Volume + button until the light turns solid orange.
3. Press the Volume Up button four times on your TV or cable box remote until the light flashes green.
4. Repeat the steps above for the Volume Down, Mute, and Power buttons.
Boston Acoustics TVee One Soundbar
The instructions are a little different if you have the Boston Acoustics TVee One Speaker Base:
1. Hold down the Learn button on the front panel for 3 seconds; the key LED light will flash slowly.
2. Now, press the “Volume Up” key on the front panel; the “Volume Up” button small light will begin to flash slowly, synchronizing with the Learn light.
3. Directly point the “device” remote with your finger at the TVeeOne’s front panel from about 18 inches away within 60 seconds.
4. Keep pressing the “Volume Up” key on your remote control upwards of four times if necessary.
5. Both flashlights light up steady for 3 seconds, which indicates that TVee One received the new command.
6. Repeat this procedure for each function you wish to program, like Volume down, power, or channel up/down.
Troubleshooting Boston Acoustic Remote Issues
If Boston Acoustic Soundbar’s remote stops working for no apparent reason, try these steps to discover if there is a problem with the remote or if you need to replace it:
Examine the Batteries
Open the remote’s back lid to determine whether the batteries are stable and safe. You should remove the batteries if they are wet, as a damp battery could indicate damage [1]. Additionally, ensure the +ve and -ve ends are correctly positioned by double-checking them.
3-Digit Codes
- 447
- 562
- 713
4-Digit Codes
- 1616
- 3698
5-Digit Codes
- 32162
- 31944
- 33698
- 31840
- 22162
- 23698
- 43698
