Vizio TVs are commonly used with other equipment, which means having to deal with multiple remote controls. To lessen the hassle, you can always use a universal remote, even from your telecom provider like Comcast. Here, we give you a step by step procedure on how you can program to your TV from Vizio the Comcast remote codes needed to simplify your watching experience. You won’t have to deal with multiple remote controls again!
Programming Vizio Comcast Remote Codes
Table of Contents
The solution to eliminating the hassle of having to use multiple remote controls is programming. This can only be executed successfully with codes. These codes are very essential and serve as the main factor to make everything possible. It condenses all functions of your remotes to a universal or singular remote control. These codes are designed specifically for the brand and device type that you have so you are ensured of compatibility.
One thing about this method is that there is a requirement of carefully entering the codes and of putting extra patience throughout the process as it is inevitable that we encounter repetition of previous steps and some errors.
You have to put in mind that this is quite tedious but the results are worth it, that’s for sure. To provide you further help, here’s a walkthrough on how you can program your Comcast remote for Vizio Devices:
1. It’s very necessary to check your devices and remote before you proceed with the programming. This will help you avoid any instances that might interrupt the process which will cost you more time.
2. List down the codes based on the brand and device type so you can instantly provide them when needed. The codes are found below right after the programming guide.
3. Using your Comcast Remote Control press and hold the SETUP button. Once you notice that red light turns on, release the button.
4. Press the device button and you’ll notice that the red light will blink and will stay on.
5. Choose a code and enter it using the number keys.
6. If the code is valid, it means your remote control is now programmed with your Vizio TV.
7. Turn off your Vizio TV and wait for at least one minute before you turn it back on. Once it’s turned on, test a few keys to further verify its functionality. If some keys don’t follow the command, repeat the steps and choose another code.
As mentioned earlier, it’s really possible that some codes won’t work, however, there are backup codes available so there’s really no need to worry. The same process works as well to other devices, just make sure to execute the steps properly.
Vizio TV Codes For Comcast Remotes
5 Digit Codes
11758 10864 12707 10885 11756 12512 12247 10178
5 Digit Codes (Digital Adapter Remote) MUG3067
11758 10864 11756 10885
4-Digit Codes (Silver with Gray OK Select Button) M1067
1756
5-Digit Codes (Silver with Red OK Select Button) MUG1067
10864 11758 10885 11756
5 Digit Codes (Spectrum & Tracer)MG3-4167 & M4167
11758 10864 10885 11756
