If you happen to lose sight of your Sylvania TV remote control, you can always opt for an alternative like a universal remote unit. It only takes a few, simple steps to integrate it with your TV, so you don’t need to worry about the technicalities of the process. Here are the steps on how to program Sylvania remote codes on Comcast controllers.
Table of Contents
Programming an Xfinity Comcast Remote to a Sylvania TV
Here is a detailed step-by-step tutorial on how you can program a Comcast remote to a Sylvania TV.
1. Gather the codes before you begin the procedure so you can conduct the process faster and easier. As the programming procedure may take a few hours, better do it during your free time to avoid interruptions during the process.
2. Turn on the TV that you wish to program. Make sure your remote has working batteries so it can work seamlessly during the process and won’t interrupt the programming.
3. Navigate through the remote control, press the setup button until the LED light located at the top part. The light should blink twice.
4. Using the number buttons on your remote, enter the four or five-digit code based provided on the list below.
5. If the code worked, you’ll now have to verify if it is actually working. To do so, press the power button on your remote. If the TV is turned off it is an initial indication that it has successfully programmed your remote towards your device.
6. To further confirm if it is fully functioning, turn the TV back on and test out multiple remote keys to ensure that it is following its specific commands such as volume, channel, and others.
7. If it does, you can do the same process and apply the same steps on other devices. However, if it doesn’t, repeat the steps from the beginning and use another code.
There’s no need to stress out when you end up repeating the process because of an invalid code since it usually happens. This is why multiple codes are provided until you can find a code that works on your end.
Xfinity Comcast Remote Codes for Sylvania TVs
5-Digit Codes (XR2, XR5, XR11, and XR15) for Newer Xfinity Remotes
- 11864 10171 10054 10030 11963 11271 11886 10020 11913 10028 11665 10065 11314 10096 14053 13332 13577 12248 12258 12270 12284 10187 10024 10587 10186 10036 12597 12275 11454 12253 10037
5-Digit Codes (Digital Adapter Remote) MUG3067
- 11864 10171 10054 10030 11963 10020 11913 10028 11665 10065 10096 10187 11314 10024 10587 10186 10036
4-Digit Codes (Silver with Gray OK Select Button) M1067
- 0054 0171 0030 0186
5-Digit Codes (Silver with Red OK Select Button) MUG1067
- 10054 10171 10030 11963 11271 11314 10187 10587
5-Digit Codes (Spectrum & Tracer) MG3-4167 & M4167
- 11864 11394 10054 10030 10171 11963 11944 11931 11913 11665 11314 10587 10381 10187 10096 10065 10028 10024 10020
