Almost every person in the world craves some entertainment perhaps after a long exhausting day at work but oftentimes, this craving is disrupted by having to deal with multiple remote controls which ruin the mood.
Table of Contents
Programming Samsung Direct TV Remote Codes
So, to avoid this issue, you might want to look for these codes. These codes are specifically designed for the brand and device type that you have. It creates a centralized command across all remote controls. They do all the essential programming to permit this to happen.
Once you have successfully worked on this task, you will expect much smoother entertainment which sounds nice. If you want to use your DIRECTV remote as the main tool to control your Samsung Device, here’s a step-by-step guide on how you can pair both devices:
1. Prepare your device as well as your remote. Make sure that all of it is working and in good condition.
2. Here’s a tip. Before you start programming, select the right code for your equipment’s brand before proceeding with the step-by-step process so you can directly provide the needed code instead of taking more time searching for it. The codes will be provided below.
3. Press and hold the SELECT and MUTE buttons. A green light should flash before you release the buttons.
4. Enter the codes correctly to avoid errors during the next steps.
5. A green light will flash two times on your remote control which indicates that the programming was successful.
6. Try to turn off your TV. After a few seconds, turn it back on for some test. Utilize some remote keys and verify if it follows their corresponding commands.
Your part is that you need to be careful in entering the codes because failure to do so might take a toll on your patience, time, and effort and you wouldn’t want to experience that. Patience is key to this task so is your focus.
Samsung Direct TV Remote Codes
Here’s a list of codes applicable for your DirecTV remote to your Samsung TV:
- 10702
- 10650
- 10178
- 10060
- 10178
- 10766
- 10814
