Many TV users experience the dilemma of a lost remote control, and as a result, they give in to purchasing the same remote unit from the brand. But did you know you can use a universal remote to control any TV or device, like Infinity Comcast remotes? If you’ve lost the remote that came with your TV, here’s a guide on how you can integrate your remote control to your Emerson TV using Comcast remote codes.
Table of Contents
Programming Emerson TV Codes For Comcast Remote
In order to program your Emerson TV with an Xfinity Comcast remote, you need to identify which codes are compatible with your TV. Codes are a unique set of numbers that are used for encoding to create centralized command across your entertainment devices and equipment.
In this guide, we will show all the steps on how you can program these codes as well as a list of all the compatible codes for your Emerson TV and Comcast remote.
1. Before you begin programming, write down all the necessary codes which you can find below. This is highly recommended so you can immediately provide the codes when needed.
2. Turn on the TV that you wish to program with your remote control. Make sure that you have already installed working batteries on your remote so you can conduct the process without interruptions.
3. On your Xfinity Comcast remote, press and hold the TV button to prepare the remote and TV for pairing.
4. Press and hold the SETUP button simultaneously until the TV key blinks twice. Once it flashed, release the button of your remote.
5. Provide the code using the number keys of your remote control. Once you enter a valid code, the TV key will blink twice again.
6. This time, the TV and remote are good to use together. To confirm if they are working, aim your remote towards your television. Press the POWER button and see if the TV turns off.
7. Once the television turns off, it’s an indicator that it has been successfully paired with the remote.
8. To further confirm if it is fully functioning, turn back the TV back on and test multiple remote keys. This will ensure that it is following specific commands such as volume, channel, and others.
If it does, you can do the same process and apply the same steps on other devices with other codes. However, if it doesn’t, repeat the process from the beginning and carefully apply all the steps mentioned to avoid errors.
You will also need to use an alternative code from the same list since not all codes will work with your remote and TV.
Emerson TV Codes for Comcast Universal Remote Controls
5-Digit Codes (XR2, XR5, XR11, XR15) for Newer Xfinity Remotes
10154 11864 10451 10171 10236 10463 11963 10180 10178 11913 11886 11928 13623 11661 11911 12183 11909 11665 11905 10282 13559 10280 11997 10270 10183 10702 10181 10179 10177 10038 10019 10623 12248 12258 12270 12284 12285 12288 12282 10855 12287 10002 10036 10032
5-Digit Codes (Digital Adapter Remote) MUG3067
10154 10236 10451 11864 10171 10463 10180 11963 10178 11913 10179 11928 10177 11911 11909 10282 11905 10280 11665 10270 10183 10181 10158 10019 10038 10185 10002 10032 10036
4-Digit Codes (Silver with Gray OK Select Button) M1067
0154 0236 0171 0463 0180 0282 0179 0178 0177 0038 0280 0451
5-Digit Codes (Silver with Red OK Select Button) MUG1067
10154 10236 10171 10463 10180 11963 10178 10623 11661 10451 11454 11993 10661 10386
5-Digit Codes (Spectrum & Tracer) MG3-4167 & M4167
11864 11394 10154 10451 10236 10462 10180 10178 10171 11661 11905 11909 11911 11913 11929 11944 11963 12167 10282 10280 10183 10182 10181 10179 10177 10158 10039 10038 10019 10002
