Onkyo Receiver Universal Remote Codes (2026): Full List + How to Program

By Willie Greer

Disclosure: TheProductAnalyst is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. This never changes which products we rank first.

If you want to run an Onkyo AV receiver — a TX-NR or TX-SR model — from a single universal remote, you need the right device code. Onkyo receivers respond to standard IR codes, but every remote brand uses its own numbering, so the code that works on a GE clicker is not the same string you punch into a DIRECTV or Comcast remote. Below are the real, commonly-cited Onkyo audio/receiver codes for the major universal-remote families, a clean 5-step programming method, an auto code-search fallback for when you don’t know your model’s exact code, and a troubleshooting section for the classic “power works but volume doesn’t” problem.

Short answer: On most universal remotes the Onkyo receiver lives under the AUD / AUX / audio device button. The codes that work for the widest range of TX-NR and TX-SR units are 0842, 1298, and 1320 on 4-digit remotes (GE/Jasco, One For All, RCA, Philips), and 30135 / 30842 on 5-digit cable and satellite remotes (DIRECTV, Comcast/Xfinity, DISH). If none of the listed codes work, use your remote’s auto code-search — it sweeps the entire Onkyo IR library for you.

Onkyo receiver remote codes by universal-remote brand

Find your remote brand below, set it to the audio/AUX device, then try the codes in order. Onkyo, like most AV brands, shipped many receivers over the years, so the first code may handle power but not volume — if so, keep trying the others in that brand’s list until one gives you power and transport/volume control.

GE / Jasco (byJASCO) universal remotes

Modern GE remotes use 4- or 5-digit code lists (CL3, CL4, CL5, CL6 — check inside the battery door). Set the remote to the AUD or AUX device, then try:

Tip: GE’s 5-digit Onkyo entries are simply the 4-digit code with a leading “2” on most CL5/CL6 lists. If neither length works, jump to auto code-search below.

RCA universal remotes

Set the RCA remote to the AUDIO (or AUX) device and try these 4-digit Onkyo audio codes:

Some older RCA 3-digit remotes don’t carry a dedicated audio-receiver library at all — on those, code-search is your only path.

One For All / URC universal remotes

One For All groups Onkyo under Amplifier/Receiver. Set the device key to AMP or AUD, then try:

On One For All models with both an Amplifier and a Receiver category, try the same codes under each — some firmware files Onkyo under one and not the other.

Philips universal remotes

Philips clickers share the same core IR library as One For All (Philips owned the brand for years), so the Onkyo audio codes overlap:

If a Philips remote only offers a 3-digit entry screen, it likely predates Onkyo’s network receivers — use code-search instead.

DIRECTV remotes (RC6x / RC7x, AV1/AV2)

DIRECTV uses 5-digit audio-receiver codes assigned to the AV1 or AV2 slot. These are the documented Onkyo audio codes:

Known quirk: 30135 sends the discrete ON command while 30842 sends OFF, and on some receivers neither toggles power cleanly. If volume keys do nothing after a TV code is loaded, select AV1/AV2, hold MUTE + SELECT for two blinks, enter 993, then press SELECT to unlock receiver volume.

DISH Network remotes (20.x / 40.x / 50.x, AUX)

DISH files Onkyo under the AUX/audio device. The widely-cited 3-digit DISH Onkyo audio codes are:

DISH remotes vary a lot by generation. If these three don’t respond, the Hopper/Wally on-screen remote setup wizard will scan Onkyo for you — that’s effectively a guided code-search.

Comcast/Xfinity, Spectrum & other cable remotes

Xfinity X1 (XR2/XR5/XR11/XR15) and most cable remotes program AV receivers as 5-digit codes. Audio components usually take a leading “3.” The commonly-working Onkyo entries are:

Newer Xfinity voice remotes pair over RF and may simply offer “Onkyo” in the on-screen Settings → Remote Setup menu — pick the brand and let it walk you through, rather than typing a code blind.

How to program an Onkyo code (5-step direct method)

This is the universal pattern. The exact button name (SETUP, MAGIC, SET, or holding the device key) differs by brand, but the sequence is the same on virtually every remote:

1. Power on the Onkyo receiver manually and aim the remote at it so it can see the IR window.
2. Select the audio device. Press the AUD / AUX / AMP / AV device button on the remote so the next code is filed under the receiver, not the TV.
3. Enter programming mode. Press and hold SETUP (or the device key on hold-to-program remotes) until the indicator light stays solid, then release.
4. Type the code. Enter one Onkyo code from your brand’s table above. A solid (not blinking) light usually means it was accepted; four quick blinks means rejected — re-enter and try the next code.
5. Test it. Press Power, then Volume Up/Down and Mute. If power works but volume doesn’t, that code is a partial match — repeat with the next code in the list until both work.

No code in the list? Use auto code-search

Auto code-search sweeps the remote’s entire IR library and stops on the first code your Onkyo answers to. It’s the most reliable route when your exact model isn’t in the printed list. The generic GE-style flow:

1. Turn the receiver on manually.
2. Hold SETUP until the light is solid, then press the AUD/AUX device button.
3. Aim at the receiver and tap CH+ (or Power) repeatedly. The remote sends one Onkyo code per press.
4. The instant the receiver turns off, stop — you’ve hit a working code.
5. Press the device button once more (or SETUP) to lock it in. Turn the receiver back on and confirm volume and mute respond.

If you overshoot, tap CH− to step back one code. Some remotes use the Volume keys instead of CH for the sweep — check your remote’s leaflet.

Onkyo, Integra & Pioneer share a code platform

Useful shortcut: Onkyo and Integra are the same company and have historically used identical IR codes — if your remote lists Integra but not Onkyo (or vice versa), the Integra audio code will almost always drive an Onkyo receiver, and the reverse is true too. Pioneer AV receivers built from roughly 2016 onward moved onto Onkyo’s engineering platform and network/IR command set after the brands merged, so a recent Pioneer receiver code is worth trying on an Onkyo as a last-ditch match (and vice versa). It won’t map every button perfectly, but it frequently gets power and volume working.

“No code works” — troubleshooting

If you’ve tried every code and your receiver still ignores the remote, work through these in order — most failures are physical or a wrong-device mistake, not a missing code.

• Wrong device button. The #1 cause. The receiver must be programmed to AUD/AUX/AMP/AV — if it’s under TV or CBL, commands go nowhere. Re-select the audio device before each code.
• Fresh batteries + line of sight. Weak batteries make the IR emitter intermittent (power may work, volume won’t). Replace both cells, confirm polarity, and keep a clear path to the receiver’s IR window — bright sunlight or strong LED lamps can swamp the sensor.
• Confirm the remote is emitting IR. Point it at a phone camera and press a button. You should see a white/purple flash on screen. No flash means a dead remote or emitter, not a code problem.
• Power but no volume = partial code. This is normal across AV brands. Keep trying the other codes in your brand’s list, or run auto code-search — you’re looking for the one code that carries the full command set.
• Volume locked to the TV. On DIRECTV/cable remotes, volume often stays mapped to the TV until you unlock it for the receiver (e.g., DIRECTV: hold MUTE + SELECT, enter 993, press SELECT).
• Reset the receiver. If it had a glitch, unplug the Onkyo from the wall for ~10 minutes to clear the microcontroller, then reconnect and re-test.
• Use HDMI-CEC instead. Many TX-NR receivers support HDMI-CEC (Onkyo calls it RIHD). Enable CEC on the TV and receiver and your TV remote can handle volume/power over HDMI — no IR code needed at all.
• App as a backup. Network-capable Onkyo TX-NR receivers work with the Onkyo Controller app over Wi-Fi, which sidesteps IR entirely if your remote situation is hopeless.

Frequently asked questions

What is the universal remote code for an Onkyo receiver?

There isn’t one single code — it depends on your remote brand. On 4-digit remotes (GE/Jasco, One For All, RCA, Philips) the most widely-working Onkyo audio codes are 0842, 1298, and 1320. On 5-digit cable and satellite remotes (DIRECTV, Comcast/Xfinity, DISH) start with 30135 and 30842. Always set the remote to the AUD/AUX device first.

Which remote button do I program the Onkyo receiver under?

Use the audio device key — labeled AUD, AUX, AMP, or AV depending on the remote. Programming an Onkyo code under TV or CBL is the most common reason a code “doesn’t work,” because the commands are sent to the wrong device slot.

The remote turns my Onkyo on and off but won’t change volume. Why?

That’s a partial code match — the code carries power but not the full volume/mute set, which is normal across AV receiver brands. Try the other codes in your brand’s list until one controls both, or run auto code-search. On DIRECTV/cable remotes you may also need to unlock receiver volume (DIRECTV: hold MUTE + SELECT, enter 993, press SELECT).

Can I use an Integra or Pioneer code on my Onkyo receiver?

Often, yes. Onkyo and Integra are the same company and use identical IR codes, so an Integra audio code will almost always drive an Onkyo. Pioneer AV receivers from about 2016 onward share Onkyo’s platform and command set after the brands merged, so a recent Pioneer code is a worthwhile last-resort attempt on an Onkyo (and vice versa).

What if none of the codes work at all?

Run your remote’s auto code-search, which sweeps the whole Onkyo library automatically. If that still fails, confirm the remote is emitting IR (check with a phone camera), replace the batteries, and verify line of sight to the receiver’s IR window. As alternatives that skip IR entirely, enable HDMI-CEC (RIHD) so your TV remote controls the receiver, or use the Onkyo Controller app over Wi-Fi on a network-capable TX-NR model.

Do TX-NR and TX-SR receivers use different codes?

They draw from the same Onkyo audio code families, so the codes listed here are worth trying on both lines. Because Onkyo released many receivers over the years, a given code may work on some models and not others — that’s exactly why we list several per brand and recommend code-search when in doubt.

Related guides

• Pioneer Receiver Universal Remote Codes
• Marantz Remote Codes
• Four-Digit Universal Remote Codes
• One For All Universal Remote Codes
• DIRECTV Remote Codes