Programming Emerson TV Remote Codes

Who on earth wound’t want to experience the convenience of operating all of their entertainment device just by using one remote? Bet, there’s no one. If you’re looking for a solution on how you can possibly do that, you’re on the right page. Programming is the key on how you can achieve this kind of seamless experience. By doing so, you can now keep your other remote controls in a shelf. But how can this programming work? What you’ll need is your remote, device, and most importantly, the codes. 

Table of Contents

Programming Emerson TV Remote Codes

What are these codes? These codes are specifically created to work on a specific brand and device type. There are tons of them and they are provided on this page as well. So, before you proceed with the programming, it is highly recommended to navigate through the list of codes first and write down the codes that corresponds with the your Emerson TV. This will help you to easily provide the code when asked during the procedure. 

Here’s how you can program universal remote for your Emerson TV: 

1. Switch on your Emerson TV and make sure that your universal remote is in good working condition to prevent any interruptions during the entire process. 

2. Point your universal remote towards your Emerson TV which you intend to program. 

3. To begin the programming, press and hold the SETUP button. Wait for the red light to flash before you release the button. 

4. On your TV screen, a column will be prompted, scroll down and select the column labeled as remote codes. Choose a code from the ones provided on this page, enter those using the number keys of your remote control. 

Emerson TV label up close

5. If you executed the process correctly, a tiny light will blink four times as an indicator. When it does, pick a new set of codes once again and enter it on your device. Once the light turned off, it means that the procedure worked. However, if it didn’t, you’ll have to repeat the steps from the start and you’ll need to enter a new code from the list. 

6. To fully verify if your remote control is functional and programmed, test out a few buttons if it does their specific commands. 

Programming Tips and Reminders

There are certain reasons why the codes are not working. Although it’s completely normal that it won’t push through on the first try. That’s the main point why there are multiple codes provided, so you can use another one when the first one won’t work. This may take up a few minutes of your time since there’s really a possibility that you need to repeat the steps. 

Another factor would be your remote has deteriorating batteries on it which causes the remote to not function well and prevents them from following the commands. Make sure to use new batteries. Lastly, some objects might be blocking your TV which is why it can’t detect any command from the remote. See to it that there are no blocking objects in front of your device. 

emerson TV Remote

Emerson TV Universal Remote Codes

Here are the codes you can use to program your Emerson TV: 

  • 4 digits Universal Remote control codes for Emerson TV

0205, 0181, 0490, 0207, 0198, 3005, 3015, 3008, 3011, 3010, 3013, 3012, 3186, 3204, 3025, 3031

  • 2 digits Universal Remote control codes for Emerson TV 

77, 84, 35, 83, 23, 04, 01, 03, 32

Writer

Willie Greer
Willie Greer
Willie Greer is the founder of The Product Analyst. A cinephile, he has made it a personal quest to achieve the awesomest home theater possible. He now shares what he has learned through the years on the site, and has enlisted the help of tech-savvy colleagues in providing more insight about today’s most sought-after gadgets.