Programming Element TV Remote Codes

There’s always a way to how you can operate your Element TV with other brands of the remote. If you have lost your original remote control and you have a spare one, you can still definitely use that. This can be possible by programming your remote using specific codes. You won’t need an expert to execute this procedure – you can easily do it yourself by simply inputting Element TV remote codes. Our team will show you how in this guide.

Table of Contents

Programming Element TV Remote Codes

Before utilizing the codes provided on the page below, here are the step-by-step instructions on how you can program your remote. Make sure that you follow the steps properly since one missed step or one wrong step will automatically result in the failure of an attempt. 

Here are the following steps for the programming of your remote:

1. Collect all the codes based on the brand of your remote. This is highly recommended so you can just automatically provide the codes when needed. This is also to avoid navigating through the list in the middle of the process that will only consume more time. 

They are listed and grouped based on brand and some of them are universal codes. If you can’t find the brand of your remote from the list, use the universal ones listed.

2. Turn on your Element TV. Check if your remote has working batteries so you can execute the whole process seamlessly. 

3. You will now try to enter the SETUP mode. Press and hold the SETUP button, until you can notice a red light at the top of your remote. Once it’s on, release the SETUP button, and make sure that the red light is still on. That’s the indication that it’s ready for programming. 

Element TV beside a cable box

4. Press and release the device button and you will notice that the red light will blink once and remains on after. 

5. Provide the four-digit code using the number keys of your remote control. Once you have entered the fourth digit, you will notice that the red light will turn off. Sometimes there are more than four-digit codes, just check out if the light turns off after the last digit. 

6. This time, it should be good to go. To further check if the remote is now working, aim your remote towards your television. Test out some of the buttons like volume, channel, and more and see if it responds as expected. If it did not, you will have to start from the beginning and repeat step one but this time you will have to use the next code in the list. 

If it worked on your first attempt, just apply the same steps to your other devices. However, if it didn’t, there’s no need to worry as it is very normal. It usually happens that some of the code won’t work. Although the process may seem easy, you will need to allocate some time since there’s a possibility that you’ll have to repeat the process multiple times. 

Remote Control Codes For Element TVs

Element Electronics tv

Here are the codes for the remote compatible with your Element TV: 

  • Newer codes 5 digit –  11886, 10178, 11687, 12183
  • Cox Universal remote codes for Element TV – 1687, 1886, 2183
  • Verizon universal remote codes for Element TV – 3264
  • Comcast Xfinity remote codes for Element TV – 13559, 11687, 12964, 12260, 13907, 11886, 11864, 12183, and 10178
  • Element TV Codes for RCA 3 in 1 Universal Remote –  11687, 11886, 12183, 12964, 13559
  • Older codes 3 digit Codes to operate your Element TV – 046, 005, 028, 043, 048, 076, 096, 155, 004, 051, 127, 151, 153, 154, 231, 236, 238, 247, 252, 168, 121

Writer

Willie Greer
Willie Greer
Willie Greer is the founder of The Product Analyst. A cinephile, he has made it a personal quest to achieve the awesomest home theater possible. He now shares what he has learned through the years on the site, and has enlisted the help of tech-savvy colleagues in providing more insight about today’s most sought-after gadgets.