Acoustic Audio PSW-10 Review (2022) — A Budget Subwoofer That Packs a Punch

If you’re looking to get a new subwoofer, it’s important to know which will be best for you. The Acoustic Audio PSW-10 is one of the most popular subs out there in the market, but will it really perform well as expected or will it be a waste of your money?

Our sound engineers have checked out what the sub has, and we’ll be detailing its offering below:

What We Like

What We Don't Like


This sub doesn’t quite have the best design. Some people might not like its black ash wood finish — especially if they want to match their sets. 

Moving on, the sub is a bit bulky too. Its dimensions are 12.4″ × 11.4″ × 12.4″, making it a bit bigger than many of its competitors. 

Acoustic Audio PSW-10 Features


Power is an important factor when you get a subwoofer. The Acoustic Audio PSW-10 comes with 400 Watts, as well as an 8-Ohm impedance that can easily handle that output. 

The product also offers 97dB of sensitivity. This means that it can easily handle high volumes. With its high-durability material and packaging, you know you’re getting a lot of value.

Sound and Bass Quality

It won’t be a complete Acoustic Audio PSW-10 review without mentioning how it performs with sound. 

After our Acoustic Audio PSW-10 review and testing, our sound engineers found that the subwoofer is more than capable of handling high-quality sound. The fact that it is down-firing means that it won’t directly shoot the sound at you. 

The sub also works with a 110 Volt grounded wall plug. You can connect it to any home theater receiver with a single or dual RCA dedicated sub output.

Frequency Response

The PSW-10 subwoofer offers 40 – 140 Hz Crossover control knobs, as well as a frequency range of 25 to 250 Hz [1]. That’s pretty good. 

With these features, the subwoofer definitely offers impressive sound and bass. It’s punchy enough to be used in large settings, and you can easily control it if you want to use it in a small area. 


Volume settings are pretty easy on the Acoustic Audio PSW-10. The sub gives you phase control switches, an adjustable gain/level, as well as low level and speaker level inputs and outputs. 

You will be able to control just about everything you want to with this sub, and that’s just the starting point. 


The PSW-10 comes with a built-in digital drive amplifier that is optimized for easy control and power output. The amp also features an independent and adjustable gain/level control as well as several impressive features like a variable low pass frequency control and an automatic switch function.


With the Acoustic Audio PSW-10, you get high-quality bass. This is primarily due to the product’s digital drive, as well as its down-firing focus. With all of this, the subwoofer provides bass that is deep and full, and you even get a more enveloping sound. 

You should also note that the subwoofer has a 250 Hz frequency limit. That is more frequency than many of its other competitors — even from Acoustic Audio. 

The PSW-10 has a low frequency of 25 Hz, and with 400 W of power, you can get an optimal volume setting.

Controls and Connectivity

The Acoustic Audio PSW-10 sub features standard RCA connectivity inputs, which allow you to connect to your home theater or surround sound system. The connectivity feature also adds Signal Sensing Auto ON/OFF, which helps you to save power over time. 


The Acoustic Audio PSW-10 sub comes with a high-quality wood finish. It is available in different driver sizes, including 6.5 inches, 8 inches, 10 inches, 12 inches, and 15 inches. 

With this sub, you get an Internally Braced and Damped MDF Bass Reflex Enclosure. The enclosure is also ported, with internal bracing and a gray batting lining that keeps the sub stable and steady. Even when you switch the volume into high gear, this sub stays grounded. 

The enclosure also helps with maximizing power. It is built to optimize volume, tuned to reduce distortion, and able to eliminate any resonance.

Value for Money

In general, the Acoustic Audio PSW-10 offers optimal value for your money. It is easy to use and install, and it works with just about everything, with optimal control settings and a seamless connectivity feature that allows you to get started in a matter of seconds. 

Acoustic Audio PSW-10 Review Conclusion

As the Acoustic Audio PSW-10 review from our audio experts shows, the product is more than effective. It is versatile, with high peak power and a range of frequencies. Regardless of the setup type you have, you can rest assured that this subwoofer is ideal for you. 

It’s great for home theater systems, large gatherings, and much more. So, if you want value for your money, the Acoustic Audio PSW-10 is here for you.

For guides and tips, here are some of the top pages we recommend: 

Properly connect your powered subwoofer to passive speakers 


Willie Greer
Willie Greer
Willie Greer is the founder of The Product Analyst. A cinephile, he has made it a personal quest to achieve the awesomest home theater possible. He now shares what he has learned through the years on the site, and has enlisted the help of tech-savvy colleagues in providing more insight about today’s most sought-after gadgets.